SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Engine Exhaust Header nut torques
I cannot locate any spec for the torque on the engine stud nuts securing the exhaust headers. Can anynoe post the info?
Thanx 1992 SVX 60K original miles Exhaust reassembly in progress |
#2
|
||||
|
||||
22 ft/lb if using new nuts, 29 ft/lbs if using old ones.
It is on page four of section 2-9 in the 1992 service manual. I like to put a little anti-seize compound on exhaust fasteners to make them come off slightly easier next time. Doug
__________________
1992 LS Touring (6/91) - Currently undergoing a five speed swap Black over Claret with spoiler; 235,000 miles; Mods: 2002 Legacy 5 speed, ACT Pressure Plate, Excedy Clutch, Short Throw Shifter, Aussie Powerchip 1992 LS Touring (6/91) Black over Claret with 2.5" setback spoiler; 202,000 miles; Mods: B&M Cooler 1994 LSi (4/93) Bordeaux Pearl; 198,000 miles; Mods: Weight reduction. 1969 Mustang GT Convertible 1970 Mustang Convertible 2000 Ford Excursion Sola lingua bona est lingua mortua. My Locker |
#3
|
|||
|
|||
Thanx!!!!!!!!!!!!!
|
Thread Tools | |
Display Modes | |
|
|