Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
|
SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
|
|
#1
01-21-2009, 11:48 AM
|
||||
|
||||
|
Front Camber Caster Plate Group Buy
SvxRide has been working with Kmac out of Australia to get SVX camber caster plates for a while now. I was working with Bill in getting them to fit his car a short while ago. Now that they have been installed and are known to be working very well, we would like to offer a group buy on them. The group buy is more or less a way to save on the costly shipping of individual units from AU.
Pictures: Sorry if they are slightly out of focus      These strut mounts are VERY high quality and give the user adjust ability beyond what camber bolts can and make it so easy to do. Just jack up the front of the car, loosen (do not remove) the 3 studs. Adjust camber or caster to desired amount. re-torque the 3 studs... Thats it! these mounts are also much firmer than the stock rubbers, which in turn also increases suspension precision which can also help your constancy in handling. The Group buy pricing is $399+shipping from NJ for a pair of front mounts. Please feel free to ask any and all questions in this thread Tom 
|
|
#2
01-21-2009, 12:18 PM
|
||||
|
||||
|
Re: Front Camber Caster Plate Group Buy
I could use a pair.
__________________
____________________________________________ 95 LS-i Red, 31,xxx; bone stock for now; Daily Driver 94 LS-i Emerald Pearl, 106,xxx,; 246 whp; Tomyx snorkus and HKS Cold air intake; PWR aluminum radiator, silicone hoses; Inline thermostat; enhanced coolant routing; external power steering and oil coolers; Phenolic intake manifold spacers; 2004 WRX 5 speed transmission; ACT Clutch Kit, Heavy Duty Pressure Plate, Lightweight flywheel, performance disc; Group N motor mounts; ‘07 WRX 4-pot front calipers, cryo-treated slotted Tribeca rotors; Hawk HPS ferro-carbon pads; Frozenrotor rear slotted rotors; SS brake lines, Axxis Ultimate pads; Rota Torque 17x8 wheels; 245/40-17 Bridgestone RE01-R's; Koni inserts with Ground Control coilovers, Eibach springs; K-Mac camber/caster adjustable strut mounts; Urethane swaybar bushings; Bontrager rear sway bar; Urethane differential bushing; Custom Whiteline adjustable rear lateral links; Outlaw Engineering forged underdrive pulley; custom grind Web intake and exhaust cams (11 mm lift, 250° duration); solid lifters; CP custom aluminum forged 11 to 1 pistons, Brian Crower coated SS intake & exhaust valves; Brian Crower upgraded springs w/ titanium retainers; NGK sparkplugs; RallyBob (Bob Legere) ported and polished cylinder heads; Eagle H-beam rods; ACL Bearings; Cometic Head gaskets; ARP head studs & fasteners; Hydra Nemesis EMS; Wideband O2 sensor; 740cc Injectors; Walbro 255lph fuel pump; Upgraded WRX starter; Equal length SS headers (3 into 1); dual Magnaflow cat converters; 2 into 1 into 2 SS exhaust with Bullet muffler; OT Fiberglass hood; Oil pressure gauge; Programmable shift light, 2017 Subaru Forester XT, metallic dark gray, 29,xxx 2005 Porsche 911 Turbo S Cabrio, 24,xxx 2006 Subaru Outback LL Bean, 166,xxx sold 92 LSL Dark Teal, Smallcar Shift Kit - sold
|
|
#7
02-11-2009, 10:00 AM
|
||||
|
||||
|
Re: Front Camber Caster Plate Group Buy
Quote:
 
__________________
1991 SVX L JDM
|
|
#8
02-11-2009, 08:11 PM
|
||||
|
||||
|
Re: Front Camber Caster Plate Group Buy
I am going to list the cut date as Feb 28th, after this time, anyone interested has 7 days to get their payments in to us. After this they can still be had, just not as cheaply
Tom
|
|
#9
04-27-2009, 05:50 PM
|
||||
|
||||
|
Re: Front Camber Caster Plate Group Buy
Sorry for the delay and lack of an update... Here is where we stand.
I have been haggling to fill a hole in the group buy because the price break for shipping and for the top-hats was an order fo 6. Unfortunately one of the members on the list has fallen out of contact. So I have been trying to find someone to fill the hole. Finally I have given up on the search and have decided to put a set on the shelf at the shop just to get the order placed at the original price, I didn't want to have to ask the people on the list to pay any more than what they already agreed upon. So, FINALLY the order has been placed and we shoudl see them soon. I will update this thread with their status as I know more. I apologize for the very long wait, but promise it will be worth it  Tom
|
|
#11
06-21-2009, 07:54 PM
|
||||
|
||||
|
Re: Front Camber Caster Plate Group Buy
All 6 kits shipped out of AU on Friday. Kevin of K-Mac said to expect them at All We'll Drive on Monday (?). My guess is that FedEx will get them there sometime this week
  -Bill
__________________
Retired NASA Rocket Scientist Most famous NASA "Child" - OSIRIS-REx delivered samples from asteroid BENNU to Earth in Sept. 2023 Center Network Member #989 '92 Fully caged, 5 speed, waiting for its fully built EG33 '92 "Test Mule", 4:44 Auto, JDM 4:44 Rear Diff with Mech LSD, Tuned headers, Full one-off suspension '92(?) Laguna, 6 spd and other stuff (still at OT's place) My Locker
|
 |
|
|
Hybrid Mode
