A little help?

[kwren]

Originally Posted by TomsSVX

you have covered every way of trying to get the connector undone... Besides just yanking it out... Not sure what to tell you

Tom

Easiest way might be to just look at the end of the 02 sensor where the "quick disconnect" is. Just about all the connectors on the SVX can be disconnected by rocking the thing that keeps it held together one way or the other. Look at the new part and you can tell which way it needs to be moved!

Keith

[essveeexxee]

10 characters.

[TomsSVX]

best thing to do is try to get up there with a LONG flat blade with a skinny end. Give it a twist when it is under the release tab while lightly pulling on the lead.

Tom

[essveeexxee]

10 characters.

[kwren]

They sure could have made that disconnect easier

[essveeexxee]

10 characters.