Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
|
SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#2
07-21-2006, 11:50 AM
|
||||
|
||||
|
We will need more info like bolt pattern & offset.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! 
|
|
#3
07-21-2006, 11:59 AM
|
||||
|
||||
|
Well, of corse everyone knows that the first step is to make sure that the bolt pattern is the right one.... That will be 5x114.3...
After that you need to start thinking about the width... If they are around 7.5 inches then you will need the right offset.... you obviously can't have a low offset because the wheel will rub on the body panel... I believe you should look for an offset near 45mm - 50mm.... So if the bolt pattern is right and the offset is right.... You should be good
__________________
2020 Subaru Outback Touring - Wife's first Subaru 2005 Volvo V70R - 5-cylinder love! :Heart: ** SOLD **1998 Subaru Legacy 2.5GT Wagon - MOST RELIABLE car I've ever owned ** SOLD **2006Subaru WRXSTi (Former "Boxer4Racing.com / Continential Tire" STi) - Built EJ22t block / EJ207 JDM STi "big port heads" - 9,000rpm MONEY PIT!!! ** SOLD **  1995 "Tree-Hugger Green" SVX L AWD(5 MT) --- "Gumby" 130K miles #399 in MY95, my original love...
|
 |
|
|
Linear Mode
