SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Dyno plots now available!
Just uploaded the plots from my baseline dyno runs (in folder Dyno Runs 7/1 - okay the date was actually 6/30!). Note that they reflect only the front wheels driving the rollers (see my other thread on lack of AWD). The ambient temperature was around 80-85 degrees F. The runs were within 5 minutes of each other (I think they were actually within 3.5 minutes of each other) and the trans was in 2nd gear with the manual button pushed in. I also gave the dyno operator a 6.5k rpm redline.
It's interesting to note that the little "dip" that Michael (longassname) had in his dyno runs also showed up in mine, but to a lesser degree. Looks like torque peaks out at around 4.7k rpms and Hp peaks at around 5.5k rpms. Note: with the exception of a high flow, 2.5 inch high flow secondary cat and 2.5 inch resonator the car is bone stock in the engine performance arena (i.e. I'm even running a stock air filter!). -Bill
__________________
Retired NASA Rocket Scientist Most famous NASA "Child" - OSIRIS-REx delivered samples from asteroid BENNU to Earth in Sept. 2023 Center Network Member #989 '92 Fully caged, 5 speed, waiting for its fully built EG33 '92 "Test Mule", 4:44 Auto, JDM 4:44 Rear Diff with Mech LSD, Tuned headers, Full one-off suspension '92(?) Laguna, 6 spd and other stuff (still at OT's place) My Locker |
|
|