SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
no movement - forward or reverse - help!
Background: My front differential case failed. A part of the housing cracked off and got between the gears, chewing up the ring & pinion.
Since I had no core to work on, difficulty in finding gears, etc., nobody around here wanted to touch it. So I bought a used unit from an out-of-state wrecking yard. Installed the unit, but get no movement from drive or reverse. Have tried putting in the FWD fuse, no difference. Any ideas beside having it towed to a tranny shop (I can swap things out, but no experience in automatics rebuild)? tia, lee |
#2
|
||||
|
||||
Very sad to here of your problem. From what I understand it is very hard to find a tranny in the junk yard. BUT BUT BUT 5spd Huck says the legacy front and rear dif's fit right in the SVX housings. You want a faster SVX? Don't care about gas milage?
I do not know about the case, if it is the same? Was your RWD working? |
#3
|
|||
|
|||
yes, the RWD was working.
Found a transaxle, working over some hints supplied by Stevebsy on proper installation. |
|
|