SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Engine question
if i was able to pick up a 95,000 mi. engine with all the seals replaced, timing belt, plugs,intake and exhaust gaskets all done while it was pulled for $800 would that be s marter then trying to fix all the seals and all that stuff on my 77,000 mi engine???seeing as im probably gonna have to have someone do it for me...sound like a good price or should i try to see if i can get it lowre??
|
#2
|
||||
|
||||
Re: Engine question
Quote:
The motor swap is not difficult if you are mechanically inclined and very patient. On an engine with 77,000 miles on it, I can't imagine it needing anything other than crank and cam seals and cam cover gaskets. That in itself is not that expensive to have done. As far as replacing intake and exhaust gaskets, I wouldn't think your engine would need them. Doug
__________________
1992 LS Touring (6/91) - Currently undergoing a five speed swap Black over Claret with spoiler; 235,000 miles; Mods: 2002 Legacy 5 speed, ACT Pressure Plate, Excedy Clutch, Short Throw Shifter, Aussie Powerchip 1992 LS Touring (6/91) Black over Claret with 2.5" setback spoiler; 202,000 miles; Mods: B&M Cooler 1994 LSi (4/93) Bordeaux Pearl; 198,000 miles; Mods: Weight reduction. 1969 Mustang GT Convertible 1970 Mustang Convertible 2000 Ford Excursion Sola lingua bona est lingua mortua. My Locker |
#3
|
||||
|
||||
That sounds like a great deal to me.
|
#4
|
|||
|
|||
if i were you, i'd just buy that motor, fill it up with fluids, seal it off, and let it sit somewhere until someone needs it.. provided it runs strong, that's a valuable little gold nugged with so many people heading towards 200k on their motors.. subaru motors ARE great, but all good things must come to an end sometime..
-adam ALTERNATIVE: buy the motor, get your hands on an arc welder, buy some steel tubes, weld yourslf a frame and.. well.. you get the idea |
#5
|
||||
|
||||
Actually, that sounds like an awesome price. I know also that the SVX engine is much sought after in the homebuilt aviation market because it's power to weight ratio is EXCELLENT. It's also got a perfect form-factor for a light aircraft.
There's a few aircraft already out there with SVX engines... a couple of them even have websites if you dig far enough Ahhh... one day... |
#6
|
||||
|
||||
That's an OK price for the engine, but I'm not sure what your intentions are. Do you mean to get it and swap it with your existing engine? If that is the case, I'd say "why". Your existing engine has fewer miles and seals aren't that expensive. The higher mileage engine will probably need them too.
Now if your goal is to acquire EG33's for future, TBD use, I'd say . Todd (owner of two extra EG33's)
__________________
Down to none |
#7
|
||||
|
||||
Quote:
|
#8
|
||||
|
||||
From what I've seen John
they typically use a geared reducer drive off the crankshaft.
Todd
__________________
Down to none |
#9
|
|||
|
|||
the reasoning i had behind looking at the second engine was that mine needs all those seals and the quote from the suby dealer was in the $1300 range for the seals and everything...also this is my dads old car and i know for a fact that there were times he drove w/o knowing there was no oil in the car so i dont know what that may have done to the engine if it had any effect at all..also i figured i could swap them and then try to fix it myself and add any parts i could to increase the performance...The whole question here is with myself and if i think i can conquer the seals on the engine w/o fubaring it...thanks for the help thus far
|
#10
|
||||
|
||||
Re: From what I've seen John
Quote:
|
|
|