SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Nailing an Issue... Ball joint Axel,, or Tie rods?
Ok Guys.
Im stumped. I get clanking noise as I turn to the left and only from the left wheel. I only get the noise as I press the gas when I turn. No Gas, No noise as I turn. What do you guys think.\? Thanks in Advance |
#2
|
|||
|
|||
Re: Nailing an Issue... Ball joint Axel,, or Tie rods?
CV joint. It's being torqued when under power, not when coasting.
dcb |
#3
|
||||
|
||||
Re: Nailing an Issue... Ball joint Axel,, or Tie rods?
Have you had a good look at the suspension? Many years ago I had a low tone rattle/rumble only when I turned in one direction. Put it on a hoist and there was a small boulder about the size of a clenched fist sitting there on the wishbone.
__________________
Peter ART Cryogenic/Slotted Rotors, Stainless Steel Brake Lines, PWR Radiator, Tranny cooler, Stebro, Earthworm's Poly Differential/front & rear swaybar bushings, Koni Inserts and Mychailo SVX Sport Springs all 4 corners, Indigo Blue paint. Liquid Silver Wheels. |
#4
|
|||
|
|||
Re: Nailing an Issue... Ball joint Axel,, or Tie rods?
All right...
It was my axel boot and the Lower control arm is shot. Was there not a series on bushings as a set from energy? |
|
|