The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > FAQs, How To's, & Vendors > How-To Docs & FAQs > Technical Service Bulletins

 
 
Thread Tools Display Modes
  #1  
Old 04-20-2010, 06:53 PM
How-To Doc How-To Doc is offline
How-To Document Administrator
 
Join Date: Apr 2010
Location: SVXWN Country
Posts: 1
Gear Reduction Driven Shaft Replacement

Gear Reduction Driven Shaft Replacement

Author: Subaru

NUMBER: 16-54-92

DATE: 11-27-92

APPLICABILITY:
ALL MODELS WITH 4EAT TRANSMISSIONS

SUBJECT:
GEAR REDUCTION DRIVEN SHAFT REPLACEMENT

Whenever the reduction drive shaft is being serviced and/or replaced, make sure the orifice plug (21 x 6) is securely in place at the end of the reduction shaft. See Figure 1. When replacing the reduction drive shaft, the orifice plug is not included with the shaft. The plug must be ordered separately. Use the latest Parts Catalog for part number information.

NOTE:
Failure to install the orifice plug will cause major internal damage to the transmission.


.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:40 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122