SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Bearings
How much would you say, on average, bearings + labor cost per wheel?
thanks -Alex |
#2
|
|||
|
|||
Here is your info..
I submitted this in another section. It was part of a comparison in prices form my first install 2 years ago to my last one just yesterday. This is what it cost me..
Roller Brg. Part No. 28016PA010 $88.00 Oil Seal Part No. 28015AA021 $ 12.84 Oil Seal Part No. 28015AA070 $ 10.60 Labor 2.6 hours $ 143.00 Total Cost $ 254.44 I didnt include tax.. But I bet you can figure it out from here... Chris |
#3
|
|||
|
|||
when they replace them do they use the teflon coated ones of later years (mines a 92)?
|
#4
|
|||
|
|||
Not Sure
I am not sure what they use. I know they told me they will repack the brand new bearing with grease before installing. Apparently the grease they are shipped in is not the right kind.
Chris |
#5
|
||||
|
||||
Quote:
__________________
Mychailo :: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ :: 1995 Laguna Blue SVX L AWD 5MT (sold) Visit my locker SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads. |
#6
|
|||
|
|||
i had heard that subaru offered a replacment that was teflon coated, not sure where i heard this...its very possible i could be wrong.
-Alex |
|
|