Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
|
SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#1
03-02-2009, 01:59 PM
|
||||
|
||||
|
quick tranny fitment Q (2002 wrx)
hi guys,
i found a good deal on a 2002 wrx transmission (5spd) and i forgot.... i need: tranny starter clutch slave cyl master cyl flywheel (+bolts) what i forgot about: do i need driveshaft? differential? axles? thanks all! 
|
|
#2
03-02-2009, 02:41 PM
|
||||
|
||||
|
Re: quick tranny fitment Q (2002 wrx)
Clicky 2345
Edit: I believe that Tom now sells a different pedal setup that works with the stock SVX brake booster/master cylinder, so using a WRX one is not necessary. One thing I would caution is that the 02-03 WRX 5MT's seem to have weaker second gears than most, I've heard many stories of unhappyness. I don't think it'll be a problem for normal driving, but if you start pushing it you may find it's not completely up to the task.
__________________
Chris 92 Ebony Mica LS-L "A Rolling Restoration": 223,250 KM - Sleeping 2007 STi 6MT, Stance GR+ coilovers, PWR Rad, JDM hood badge, svxfiles 6000K HIDs, JDM Clear Corners, $15/15 min mod, $20/20 min mod, Energy Swaybar Bushings, Hella Supertones horns, Gold STi BBS rims, Group A lightweight crank pulley, A/C system removed, Custom header-back exhaust, Hybrid carbon/metal rear sway bar, restored headlights with CCFL halos 2008 Subaru Legacy Spec B - Diamond Grey Metallic - Sold 2020 Ram 1500 Longhorn - Red Pearl Last edited by Crazy_pilot; 03-02-2009 at 02:51 PM.
|
|
#3
03-02-2009, 07:57 PM
|
||||
|
||||
|
Re: quick tranny fitment Q (2002 wrx)
I'm still running an '02 WRX 5MT in mine. Still no issues to speak of.
You still need a crossmember (TomsSVX or custom)
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available!
|
|
#4
03-02-2009, 09:56 PM
|
|||
|
|||
|
Re: quick tranny fitment Q (2002 wrx)
Sorry to hijack, but (Earthworm) for the crossmember, it looks like you cut out a section on the underside of the stock svx crossmember and drilled holes to accommodate the rest of the WRX crossmember. Am I correct in this observation? Just asking because that's what I am planning on doing with mine, and I always feel better knowing something has been done in the past with success before I do it.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
