Part #'s needed

Thanks for all your help I am glad you had me point out the part I needed cause it would have been $100 for parts I didn't need

[Aredubjay]

Originally posted by KEVINL
Thanks for all your help I am glad you had me point out the part I needed cause it would have been $100 for parts I didn't need

Yeah, sorry about that. You have KuoH3 to thank. He "lurks" here and had replaced those same bushings and e-mailed me personally with the suggestion. I would have hated it if I'd caused you to spend needless money. I'm glad all is working out, though. Hope you get things back to "normal."

[Aredubjay]

Kevin, don't forget to order new nuts for your mounts. They're not supposed to be re-used.

ZSVX, sorry, the tow hooks are part of the "impact bar." You'd have to order the whole unit.

Well did you have any luck finding the part numbers

Thanks

[Aredubjay]

Originally posted by KEVINL
Well did you have any luck finding the part numbers

Thanks

Dude, the part number for the mount was listed on the diagram I linked you to (41322PA000). As for the nuts, sorry, I don't know. The number on the diagram is kinda fouled up. You might e-mail KuoH3, or post on the Yahoo site asking him for the number of the nuts.

Thanks for the info it is a valid part number I assume this is for one of the bushings meaning I need to order 2

[Aredubjay]

Originally posted by KEVINL
Thanks for the info it is a valid part number I assume this is for one of the bushings meaning I need to order 2

Yes.