SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Installing Starter
I installed a starter on my 96 SVX this weekend. Noticed there are two holes to mount to the transmission. When I removed the old starter all that was in place was a long (5-6") gold bolt. When I went to install I noticed a shorter bolt attached to a ground wire which was mounted to the fire wall. I can only assume that based on its placement and size (2-3") it is meant for the starter.
Is this correct? If so, is the longer bolt meant to go on the upper most mounting hole? Does it even matter? Thanks |
#2
|
||||
|
||||
Re: Installing Starter
When I replaced mine, I remember the longer bolt on the top of the starter attaching to the trans. It was also holding a bracket with a bolt attached to a ground wire going to the battery. The bottom bolt is actually a stud that bottoms out on the Trans and has a nut on the end.
__________________
Father of 5 sons and 1 daughter Subaru SVX for fun Hyundai Veracruz for the wife. Susuki SX4 for my older son Ford Ranger for work Mercedes Benz Sprinter for vacation trips, EZ GO Golf cart for driving kids around gated community. Last edited by dannmarr; 06-11-2013 at 02:30 PM. |
Thread Tools | |
Display Modes | |
|
|