EG33 builder's, you know who you are...

[Schralper]

Just a thought but since LAN is no longer dealin' parts.
Maybe we should start a list of internal parts options/availability?
Just a thought.
I know there ain't much out there. Or is there?
Stuff like pistons, bearings, studs/bolts, cam regrinders?

[SilverSpear]

Originally Posted by Schralper

Just a thought but since LAN is no longer dealin' parts.
Maybe we should start a list of internal parts options/availability?
Just a thought.
I know there ain't much out there. Or is there?
Stuff like pistons, bearings, studs/bolts, cam regrinders?

-Rods: Eagle with ARP bolts (STi)
-Bearings: Also any STi bearings will fit (Cosworth, ACL, Clevite...)
-Studs/Bolts: ARP
-Cam Regrinders: Web Cams, Deltacams, etc.... (specify the profile that you -want and send them your old cams for a regrind...)
-Gaskets: Cometic
-Pistons: Well you can send an OEM piston to Ross or CP or.... and have them do replacements according to specs

[Schralper]

Originally Posted by SilverSpear

-
Rods: Eagle with ARP bolts (STi)
-Bearings: Also any STi bearings will fit (Cosworth, ACL, Clevite...)
-Studs/Bolts: ARP
-Cam Regrinders: Web Cams, Deltacams, etc.... (specify the profile that you -want and send them your old cams for a regrind...)
-Gaskets: Cometic
-Pistons: Well you can send an OEM piston to Ross or CP or.... and have them do replacements according to specs

Exactly.
I know about some of these, but is there a list of PN's?
I say that cuz lookin @ ARP's catalog it doesn't show any head studs.
What about ARP bolts for stock rods?
As for pistons I was hopin' there might actually be an off the shelf on from Ross, etc.
I'm gonna look into some clevite durashield bearings, see if they have them available.

[SilverSpear]

Originally Posted by Schralper

Exactly.
I know about some of these, but is there a list of PN's?
I say that cuz lookin @ ARP's catalog it doesn't show any head studs.
What about ARP bolts for stock rods?
As for pistons I was hopin' there might actually be an off the shelf on from Ross, etc.
I'm gonna look into some clevite durashield bearings, see if they have them available.

Man you should contact companies if you are serious about that.
- Email ARP
- Stock rods? you want to keep stock rods?
- Pistons should be custom made according to specs.
- Bearings, try to buy not too stiff and not too soft bearings...

what you also should do is....

[Schralper]

Thanx SS.

I guess i'll just shut up from now on.

[TomsSVX]

Originally Posted by Schralper

Thanx SS.

I guess i'll just shut up from now on.

No you are right... problem is, a lot of the companies that make EG33 specific components do it by special order, so not much part #'s available... I will dig up what I have when I have more time

Tom