security question

[NoName]

where is the dashboard security on/off switch
I look all over and can't find it

can someone help with a picture or something
94 svx lsi

http://www.subaru-svx.net/photos/files/How-To/27326.pdf

[dwd1985]

It is on the left side of the steering wheel. There will be 3 buttons next to each other. The cruise control activation button, the fog lights, and closest to the steering wheel, the security switch. When the system is active, the red light will blink. When it is inactive, it will stay red the whole time.

[Earthworm]

If yours is a Canadian SVX then you don't have a security system.

[AJ4U2]

Originally Posted by dwd1985

It is on the left side of the steering wheel. There will be 3 buttons next to each other. The cruise control activation button, the fog lights, and closest to the steering wheel, the security switch. When the system is active, the red light will blink. When it is inactive, it will stay red the whole time.

I have a problem with mind, My light stays on and will not blink or set, when i push the buttom in the light goes out but will not arm. Is there a fuse or relay or do i need to replace the module behind the glove box, 1992 model, it was working until i unhooked the battery and when i try to reset the remotes is when it mess up,

[Suby Fan]

Originally Posted by AJ4U2

I have a problem with mind, My light stays on and will not blink or set, when i push the buttom in the light goes out but will not arm. Is there a fuse or relay or do i need to replace the module behind the glove box, 1992 model, it was working until i unhooked the battery and when i try to reset the remotes is when it mess up,

have you reporgramed the FOB to the car?

[AJ4U2]

Originally Posted by Suby Fan

have you reporgramed the FOB to the car?

It won't go in the set mode to do that, the light stays on will not blink at all, when i push the buttom in the light goes out, it acts like a relay is stuck in the open position or someting in that effect.

[AJ4U2]

Originally Posted by AJ4U2

It won't go in the set mode to do that, the light stays on will not blink at all, when i push the buttom in the light goes out, it acts like a relay is stuck in the open position or someting in that effect.

Is there a relay besides the control module with this security, and are all 1992 behind the glove box, I would hate to have to pull all this out if there is somewhere else to look for fix. or is it better just to get a aftermarket one to replace this one, what type is the easier to do, don't need the remote start, just the lock and unlock with sound.
Thanks if anyone can help

[AJ4U2]

Originally Posted by AJ4U2

Is there a relay besides the control module with this security, and are all 1992 behind the glove box, I would hate to have to pull all this out if there is somewhere else to look for fix. or is it better just to get a aftermarket one to replace this one, what type is the easier to do, don't need the remote start, just the lock and unlock with sound.
Thanks if anyone can help

Well there is a fuse in the module, 2amp buss type and it was blown out so all i done was replace the fuse and wella fix, glove box was not all that bad.About a 35 minute job, not bad for a senior citizen.