SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Front End Covers / Spark plug wires
Now that i have my new toy, i want to purchase a front end cover. So any info on what company makes the best, cost, etc. would be greatly appreciated. (I would like a Subaru one that says SVX on the front.)
Secondly I would also like to purchase a set of High Performance spark plug wires, I did some research and Kinetic Concepts seems to deal alot in SVX parts, would this be a good route to take. Thanks for any info, Paul 92 SVX Touring Coupe 105k miles |
#2
|
||||
|
||||
Re: Front End Covers / Spark plug wires
Quote:
You can go here to get your front end cover: https://ssl.autocenter.net/webparts/...g_SVX_280.html If this link takes you to the top of the page, just scroll down 'til you get to the covers. There's a hood cover and a full front end cover. They are both embossed with the SVX logo. As for the "spark plug wires," they are not changeable . . . that is, unless you buy new coils ($$$$$$$). Your SVX is of the "coil over" design, which means that there is an individual coil for each of the six spark plugs. The wires go from the coil to the igniter. So, unlike other cars, you can't just change out the spark plug wires.
__________________
Randy Johnson 3rd Registered Member 02-21-2001 First Member to Reach 10,000 Posts First to arrive at the very first Reading Meet Subaru Ambassador 1992 SVX PPG Pace Car Replica 110+k 1993 White Impreza L 240+K miles 2001 Legacy Outback Limited Sedan 250+K miles 2013 Deep Indigo Pearl Legacy 3.6R 49+K miles "Reading is my favorite Holiday" Mike Davis -- at Reading VI Last edited by Aredubjay; 08-05-2001 at 05:03 PM. |
#3
|
||||
|
||||
a bit more detail
Not that Aredubjay was wrong, I am just adding more information to the mix. In the case of spark plug wires: what Aredub was trying to portray was that there is one coil per plug and that no wire (spark plug wire) exists due to the design. The coils bolt directly on top of the plug eliminating the need for a spark plug wire. This means less loss and a hotter spark potential. The wires that ARE being refered to are just the powered and trigger wires that charge and control the coils. This is a low voltage side and I have nothing to find flaw in its design..... well except in the hassle and cuss words required to CHANGE the plugs. My $0.02
Chris |
|
|