The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > General SVX Babble

Reply
 
Thread Tools Display Modes
  #1  
Old 04-25-2018, 05:22 AM
shotgunslade's Avatar
shotgunslade shotgunslade is offline
Registered User
Alcyone Gold Contributor
 
Join Date: Jul 2003
Location: princeton, nj
Posts: 1,007
Registered SVX Classic SVX
SVX Strut Top Mounts

Are the SVX strut top mount stud patterns identical to any other Subaru’s? Want to replace the ridiculously harsh K-Mac pillow-ball camber adjustable top mounts on the ‘94 emerald with the Whiteline camber-adjustable polymer top mounts. Not listed for the SVX, but listed for lots of older WRX’s, Impreza’s, Legacy’s, etc. Realize compatibility of front and rears may be different. Think the rears on the Emerald may still be OEM.
__________________
____________________________________________
95 LS-i Red, 31,xxx; bone stock for now; Daily Driver

94 LS-i Emerald Pearl, 106,xxx,; 246 whp; Tomyx snorkus and HKS Cold air intake; PWR aluminum radiator, silicone hoses; Inline thermostat; enhanced coolant routing; external power steering and oil coolers; Phenolic intake manifold spacers; 2004 WRX 5 speed transmission; ACT Clutch Kit, Heavy Duty Pressure Plate, Lightweight flywheel, performance disc; Group N motor mounts; ‘07 WRX 4-pot front calipers, cryo-treated slotted Tribeca rotors; Hawk HPS ferro-carbon pads; Frozenrotor rear slotted rotors; SS brake lines, Axxis Ultimate pads; Rota Torque 17x8 wheels; 245/40-17 Bridgestone RE01-R's; Koni inserts with Ground Control coilovers, Eibach springs; K-Mac camber/caster adjustable strut mounts; Urethane swaybar bushings; Bontrager rear sway bar; Urethane differential bushing; Custom Whiteline adjustable rear lateral links; Outlaw Engineering forged underdrive pulley; custom grind Web intake and exhaust cams (11 mm lift, 250° duration); solid lifters; CP custom aluminum forged 11 to 1 pistons, Brian Crower coated SS intake & exhaust valves; Brian Crower upgraded springs w/ titanium retainers; NGK sparkplugs; RallyBob (Bob Legere) ported and polished cylinder heads; Eagle H-beam rods; ACL Bearings; Cometic Head gaskets; ARP head studs & fasteners; Hydra Nemesis EMS; Wideband O2 sensor; 740cc Injectors; Walbro 255lph fuel pump; Upgraded WRX starter; Equal length SS headers (3 into 1); dual Magnaflow cat converters; 2 into 1 into 2 SS exhaust with Bullet muffler; OT Fiberglass hood; Oil pressure gauge; Programmable shift light,

2017 Subaru Forester XT, metallic dark gray, 29,xxx

2005 Porsche 911 Turbo S Cabrio, 24,xxx

2006 Subaru Outback LL Bean, 166,xxx sold

92 LSL Dark Teal, Smallcar Shift Kit - sold
Reply With Quote
  #2  
Old 04-25-2018, 07:21 AM
SVX_MY_BABY's Avatar
SVX_MY_BABY SVX_MY_BABY is offline
Posting since Dec.'98
Subaru Silver Contributor
 
Join Date: Jun 2002
Location: HALIFAX Nova Scotia
Posts: 1,472
Registered SVX
Re: SVX Strut Top Mounts

There is a thread here somewhere on modifying the WRX front to fit if I remember correctly.

I believe both front & rear are unique to the SVX.
__________________
Peter
ART Cryogenic/Slotted Rotors, Stainless Steel Brake Lines, PWR Radiator, Tranny cooler, Stebro, Earthworm's Poly Differential/front & rear swaybar bushings, Koni Inserts and Mychailo SVX Sport Springs all 4 corners, Indigo Blue paint. Liquid Silver Wheels.
Reply With Quote
  #3  
Old 04-25-2018, 08:24 AM
shotgunslade's Avatar
shotgunslade shotgunslade is offline
Registered User
Alcyone Gold Contributor
 
Join Date: Jul 2003
Location: princeton, nj
Posts: 1,007
Registered SVX Classic SVX
Re: SVX Strut Top Mounts

In which case, Young Tom may well have drilled the strut towers to accept an alternate stud spacing, when he added the K-Macs, so I should reach out to him to find out what configuration he bought.
__________________
____________________________________________
95 LS-i Red, 31,xxx; bone stock for now; Daily Driver

94 LS-i Emerald Pearl, 106,xxx,; 246 whp; Tomyx snorkus and HKS Cold air intake; PWR aluminum radiator, silicone hoses; Inline thermostat; enhanced coolant routing; external power steering and oil coolers; Phenolic intake manifold spacers; 2004 WRX 5 speed transmission; ACT Clutch Kit, Heavy Duty Pressure Plate, Lightweight flywheel, performance disc; Group N motor mounts; ‘07 WRX 4-pot front calipers, cryo-treated slotted Tribeca rotors; Hawk HPS ferro-carbon pads; Frozenrotor rear slotted rotors; SS brake lines, Axxis Ultimate pads; Rota Torque 17x8 wheels; 245/40-17 Bridgestone RE01-R's; Koni inserts with Ground Control coilovers, Eibach springs; K-Mac camber/caster adjustable strut mounts; Urethane swaybar bushings; Bontrager rear sway bar; Urethane differential bushing; Custom Whiteline adjustable rear lateral links; Outlaw Engineering forged underdrive pulley; custom grind Web intake and exhaust cams (11 mm lift, 250° duration); solid lifters; CP custom aluminum forged 11 to 1 pistons, Brian Crower coated SS intake & exhaust valves; Brian Crower upgraded springs w/ titanium retainers; NGK sparkplugs; RallyBob (Bob Legere) ported and polished cylinder heads; Eagle H-beam rods; ACL Bearings; Cometic Head gaskets; ARP head studs & fasteners; Hydra Nemesis EMS; Wideband O2 sensor; 740cc Injectors; Walbro 255lph fuel pump; Upgraded WRX starter; Equal length SS headers (3 into 1); dual Magnaflow cat converters; 2 into 1 into 2 SS exhaust with Bullet muffler; OT Fiberglass hood; Oil pressure gauge; Programmable shift light,

2017 Subaru Forester XT, metallic dark gray, 29,xxx

2005 Porsche 911 Turbo S Cabrio, 24,xxx

2006 Subaru Outback LL Bean, 166,xxx sold

92 LSL Dark Teal, Smallcar Shift Kit - sold
Reply With Quote
  #4  
Old 04-26-2018, 12:48 AM
jman050's Avatar
jman050 jman050 is offline
Its a Classic!
 
Join Date: Jul 2005
Location: tallahassee fl
Posts: 531
Re: SVX Strut Top Mounts

I used the 05 sti coilovers. The top mounts fit fine but 1 stud must be repositioned.
__________________
[SIGPIC][/SIGPIC]
STi BBS wheels,legacy gt 4.44, 3" catback exhaust, Stance GR+ 7k/5k, QS Teflon adjustable endlinks, Hankook EVO 245/40/17, 95-LS escaine seats, GC8 V7 steering wheel, JDM clear corners, small car clear lenses, Alcyone badge, JDM rear taillight, 97 grille, stevesby bumper, PWR radiator, Perrin Crank pulley, Urethane Swaybar bushings, urethane diff bushings, DDM 6k 55watt lows and 4500k 35watt fog lights; $15/15min mod, Motorsport whs 22mm rear swaybar, QC shift kit, ToMyx intake, z32 aluminum calipers 13" rotors, nitrous express proton + wet kit.
Reply With Quote
  #5  
Old 04-26-2018, 01:15 PM
shotgunslade's Avatar
shotgunslade shotgunslade is offline
Registered User
Alcyone Gold Contributor
 
Join Date: Jul 2003
Location: princeton, nj
Posts: 1,007
Registered SVX Classic SVX
Re: SVX Strut Top Mounts

J-Man. I note from your signature that you have z-32 calipers with 13” rotors and 17” wheels. Did you have any fitment problems? I’m currently planning to do the 04 WRX 4-pot caliper/ Tribeca 12.4” rotor mod that is being touted over at SVX Nation on Facebook. Claimed to be a true bolt-on after adding the spacers to the calipers? I also have 17x8 Rota wheels. Any thoughts?
__________________
____________________________________________
95 LS-i Red, 31,xxx; bone stock for now; Daily Driver

94 LS-i Emerald Pearl, 106,xxx,; 246 whp; Tomyx snorkus and HKS Cold air intake; PWR aluminum radiator, silicone hoses; Inline thermostat; enhanced coolant routing; external power steering and oil coolers; Phenolic intake manifold spacers; 2004 WRX 5 speed transmission; ACT Clutch Kit, Heavy Duty Pressure Plate, Lightweight flywheel, performance disc; Group N motor mounts; ‘07 WRX 4-pot front calipers, cryo-treated slotted Tribeca rotors; Hawk HPS ferro-carbon pads; Frozenrotor rear slotted rotors; SS brake lines, Axxis Ultimate pads; Rota Torque 17x8 wheels; 245/40-17 Bridgestone RE01-R's; Koni inserts with Ground Control coilovers, Eibach springs; K-Mac camber/caster adjustable strut mounts; Urethane swaybar bushings; Bontrager rear sway bar; Urethane differential bushing; Custom Whiteline adjustable rear lateral links; Outlaw Engineering forged underdrive pulley; custom grind Web intake and exhaust cams (11 mm lift, 250° duration); solid lifters; CP custom aluminum forged 11 to 1 pistons, Brian Crower coated SS intake & exhaust valves; Brian Crower upgraded springs w/ titanium retainers; NGK sparkplugs; RallyBob (Bob Legere) ported and polished cylinder heads; Eagle H-beam rods; ACL Bearings; Cometic Head gaskets; ARP head studs & fasteners; Hydra Nemesis EMS; Wideband O2 sensor; 740cc Injectors; Walbro 255lph fuel pump; Upgraded WRX starter; Equal length SS headers (3 into 1); dual Magnaflow cat converters; 2 into 1 into 2 SS exhaust with Bullet muffler; OT Fiberglass hood; Oil pressure gauge; Programmable shift light,

2017 Subaru Forester XT, metallic dark gray, 29,xxx

2005 Porsche 911 Turbo S Cabrio, 24,xxx

2006 Subaru Outback LL Bean, 166,xxx sold

92 LSL Dark Teal, Smallcar Shift Kit - sold
Reply With Quote
  #6  
Old 04-27-2018, 01:54 PM
Jvan Jvan is offline
Registered User
 
Join Date: Oct 2003
Location: Chappaqua,NY
Posts: 461
Re: SVX Strut Top Mounts

Not to highjack this thread but I am interested in the $ pot WRX swap as well and hope he answers soon.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 01:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122