Transmission difference problem?

[-JJ-]

I have recived my 94' 4EAT from japan, looks nice and doesnt smell burnt like mine , only problem is that it has, what i assume to be, a speed sensor in the front diff, my 92' 4EAT does not, it this going to cause major problems, or can i wire the box up the same as my original box, negationg the front diff sensor??????

Cheers
Jake

[oab_au]

Originally Posted by -JJ-

I have recived my 94' 4EAT from japan, looks nice and doesnt smell burnt like mine , only problem is that it has, what i assume to be, a speed sensor in the front diff, my 92' 4EAT does not, it this going to cause major problems, or can i wire the box up the same as my original box, negationg the front diff sensor??????

Cheers
Jake

Gid'ay mate I thought that it would have the sensor in the front diff, instead of in the transmission. Don't know why they would keep it there, it the latter boxs.

The wiring that runs down to the box has the sensor wires at the plug. You need to run these wires to the sensor in front diff. I am sure that Phil (b3lha) has sorted this out, before. Send him a PM. If he can't help, I'll scan the wiring.

Harvey.

[-JJ-]

I have a speed sensor in the old box, in the transfer case, there is the same sensor on the new box too, aswell as the sensor in the front diff??

[oab_au]

Originally Posted by -JJ-

I have a speed sensor in the old box, in the transfer case, there is the same sensor on the new box too, aswell as the sensor in the front diff??

Hi Jake, there are two speed sensors. The No.1 is inside the rear section, of both types of boxes. The No.2 speed sensor on the Aust box is inside the box, at the parking gear. In the JDM box, it is on the front diff.

You need to run the three sensor wires from the plug, that the box plugs into, to the sensor in the front diff.
Looking at the plug that the box plugs into, there is 16 holes, the sensor output is a white wire at pos. 15. The black is at pos.14, and the brown is at pos.8.

I don't have the diagram of the wiring, to the JDM/US No.2 sensor to tell what the colour is.

Harvey.

[-JJ-]

I don't have the diagram of the wiring, to the JDM/US No.2 sensor to tell what the colour is.

?? what do you mean ??

Do you mean the order they attach to the no2 sensor on the box??

also i have just pm'd Phil

[oab_au]

Originally Posted by -JJ-

I don't have the diagram of the wiring, to the JDM/US No.2 sensor to tell what the colour is.

?? what do you mean ??

Do you mean the order they attach to the no2 sensor on the box??

also i have just pm'd Phil

I don't have any info on the wiring of the No.2 sensor that is mounted in the front diff. I can't tell if the wiring for that sensor is connected through that plug, or has a different loom and plug for it. I just guess that the wiring colours are the same as the Aust sensor.

Harvey.