The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Technical Q & A

Reply
 
Thread Tools Display Modes
  #1  
Old 07-14-2003, 08:42 PM
kpcusa kpcusa is offline
Registered User
 
Join Date: Jul 2003
Location: Syracuse, NY
Posts: 7
Send a message via AIM to kpcusa
Engine quits - ?!

I recenty had the timing belt replaced on my SVX. Ever since, the engine quits on me - mostly when accelerating to 50 mph or coming to a stop. It does start right back up but may stall out again.

I called the dealership and they said to see if it continues and, if so, to bring it back for them to look at further.

Before I do so, I want to make sure I know the possible issues I may be facing. As these are low production units and it's likely the mechanics could be first-timers on the SVXs (I don't want to pay for their education). Any input or similar experiences would be greatly appreciated.

I have also replaced the fuel pump recently.

The car always gets premium fuel and is not driven hard.

Thanks for your help.
__________________
1995 SVX LSi - Bordeaux Pearl - 103,000 miles
Reply With Quote
  #2  
Old 07-15-2003, 05:05 AM
SVX10's Avatar
SVX10 SVX10 is offline
Fighting with electricity
 
Join Date: Mar 2001
Location: Tempe, AZ
Posts: 1,204
Send a message via AIM to SVX10 Send a message via Yahoo to SVX10
My car kept dying when my MAF went bad. Mine died when I'd stop, but for all I know it could cause it to die when accelerating. It would usually start right back up, then die a couple minutes later. Doesn't sound like a great match, but it's the only thing I can think of.
__________________
Time for my very own long list of mods:
92 SVX LS-L - Ebony Pearl - 2002 WRX 5MT trans w/STi gearset (rebuilt & installed myself ) - BMW E46 HID retrofit - Kenwood Headunit - Phoenix Gold 75x4 RMS amp - Alpine Type R 6.5" front components - Alpine Type R 6x9 3way rear speakers - 18"x9" Rota G-Force wheels w/225/40ZR18 Toyo T1R's - Mychailo's custom springs - Urethane front & rear sway bar bushings - KC exhaust (2.5" dual magnaflow) - Escaine seat swap - Removed Spoiler

I don't care if Subaru says it's STI...it will always be STi to me
Reply With Quote
  #3  
Old 07-15-2003, 10:50 AM
Clydesvx Clydesvx is offline
Way over-the-hill Member
 
Join Date: Jul 2001
Location: Elkridge, Md.
Posts: 227
If you just had the Timing belt replaced they probably changed your spark plugs and air filter. I'd check the connection on the MAF sensor. They may NOT have tightened the connection. It is the plug on top of the air cleaner housing. Just a possible thought. The problem sounds like a faulty MAF.
__________________
'92 LSL TEAL 277,000 miles
Trans (on # 3) Engine (on # 2)
"NEW" VISORS
'03 Forester XS 214,000 miles
'05 Outback 3.0R
Reply With Quote
  #4  
Old 07-15-2003, 01:42 PM
Aredubjay's Avatar
Aredubjay Aredubjay is offline
Rat Fink Member ~:o)
 
Join Date: Feb 2001
Location: Owensboro, KY
Posts: 11,672
Send a message via ICQ to Aredubjay Send a message via AIM to Aredubjay Send a message via Yahoo to Aredubjay
Registered SVX
Possibly an MAF Sensor, possibly a vacuum leak. Check to make sure they replaced all the hoses connected to the intake bits. Also check for cracks in the MAF sensor housing and the plastic intake pieces.
__________________
Randy Johnson
3rd Registered Member 02-21-2001
First Member to Reach 10,000 Posts
First to arrive at the very first Reading Meet
Subaru Ambassador

1992 SVX PPG Pace Car Replica 110+k
1993 White Impreza L 240+K miles
2001 Legacy Outback Limited Sedan 250+K miles
2013 Deep Indigo Pearl Legacy 3.6R 49+K miles

"Reading is my favorite Holiday"
Mike Davis -- at Reading VI
Reply With Quote
  #5  
Old 07-16-2003, 10:16 PM
kpcusa kpcusa is offline
Registered User
 
Join Date: Jul 2003
Location: Syracuse, NY
Posts: 7
Send a message via AIM to kpcusa
Follow up

I took it to the dealer today - no stored codes and the darn car didn't stall during two test drives (of course!).
__________________
1995 SVX LSi - Bordeaux Pearl - 103,000 miles
Reply With Quote
  #6  
Old 07-17-2003, 05:38 AM
Clydesvx Clydesvx is offline
Way over-the-hill Member
 
Join Date: Jul 2001
Location: Elkridge, Md.
Posts: 227
My dealer (Heritage Subaru) told me that the only way they can 'SEE' the MAF sensor problem is if occurs while they have it attached to the computer. I'd WD40 the MAF connector and see if the problem goes away. Check the PARTS folks that were mentioned in other posts for the best price on a MAF sensor. You can also check your local junk yards. Someone once wrote that an IMPREZA MAF sensor will work. The MAF sensors are easy to install. If the Impreza sensor is a match they will probably be easier to find.
I got mine from Subaruparts.com in Washington State and saved over $100 over the Heritage price.
__________________
'92 LSL TEAL 277,000 miles
Trans (on # 3) Engine (on # 2)
"NEW" VISORS
'03 Forester XS 214,000 miles
'05 Outback 3.0R
Reply With Quote
  #7  
Old 07-18-2003, 05:37 PM
gl1674 gl1674 is offline
Registered User
 
Join Date: Dec 2001
Location: Bay Area
Posts: 313
I've cut mine open and soldered the connector back to the PCB.
The stalling problems went away. There were no ECU codes either.
Apparently the connector tends to break off whenever it is disturbed (spark plugs replacement requires disconnecting).
The top lid of the MAF sensor is sealed with a rubbery sealant - if you cut through it, you can take the lead off.
Reply With Quote
  #8  
Old 09-03-2003, 01:24 PM
kpcusa kpcusa is offline
Registered User
 
Join Date: Jul 2003
Location: Syracuse, NY
Posts: 7
Send a message via AIM to kpcusa
Talking MAF fixed it!

Thanks for your input - it turned out to be the air flow meter (MAF sensor). I was able to locate a used unit for $45 (plus $10 S&H). Installing it took all of 10 minutes.

Now it runs like a real champ.

Thanks again.

Ken
__________________
1995 SVX LSi - Bordeaux Pearl - 103,000 miles
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 08:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122