can you put ej parts into eg33

[92svxinmn]

wonder if you can use connecting rods from the ej25 or not
differences in rods
what about ej25 high boost sleeves

[Fuzz541]

The EG33 shares bore and stroke with the EJ22, not the EJ25. So most crossover parts would have to come from that engine. I have no idea about rod length, so I'll leave that to the experts. www.crawfordperformance.com may have parts that would fit your question.

What are you trying to accomplish with your EG33? Many have been built into high-performance sandrail and aircraft powerplants, so there is some support out there. Check the turbo and supercharger threads here for more info. I'm still quite the n00b when it comes to SVX stuff, but I'm learning.

[SilverSpear]

If you get any useful response please post it in the forum, it might be interesting for all.

[92svxinmn]

guess it has smaller housing bores on the ej25, thats what needforspeed said
was looking at it to get the big bore 100mm and the longer stroke

guess i would need a custom crank for that was looking that way anyway