SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Slider Pulley?
I am a Newbie so please bear with me, I have a Chilton's book (which i think sucks) but it calls the Tension adjustor a "Slider Pulley"? I have checked the parts stores online and can not find this part listed, are there other names for this part. My Crankshaft Pulley came apart and i want to fix everything in one go, also have a oil leak so want to pull the oil pump too. But i need this part number to replace the Bearing on the slider bolt.
Thank for the help.
__________________
_______________ 92svxman & Freida the co-pilot. First 92 Claret(flat color,IMHO) Two 92 Teal(much nicer color) 5 Speed pending, from 93 Legacy Turbo 4.11 Tranny/rear diff. May go for 3.90 Claret 145K Underdrive Pulley from Newbies2005 New timing belt new radiator new water pump new timing belt cover New headlights and harness Replaced exhaust (with stock) Life on the road who could ask for more |
#2
|
||||
|
||||
__________________
. Earl .... ... .... ><SVX(*> Subaru Ambassador [COLOR=”silver”]1992 Tri Color L[/COLOR] ~45K (06/91) #2430 1992 Dark Teal LS-L ~184K (05/91) #0739 1992 Claret LS-L ~196K (05/91) #0831 1992 Pearl LS-L ~103K (06/91) #1680 1992 Pearl LS-L ~151K (06/91) #2229 1992 Dark Teal LS ~150K (07/91) #3098 (parts car) 1992 White LS-L ~139K (08/92) #6913 1993 25th AE ~98K (02/93) #164 1993 25th AE ~58K (02/93) #176 1993 25th AE ~107K (02/93) #215 1993 25th AE ~162K (02/93) #223 1994 Laguna Blue Pearl LSi ~124K (1/94) #2408 1994 Laguna Blue Pearl LSi ~144K (10/93) #1484 1994 Laguna Blue Pearl LSi ~68K (10/93) #1525 1994 Barcelona Red LSi ~46K (02/94) #2624 1994 Pearl LSi ~41K (12/93) #1961 1995 Bordeaux Pearl LSi ~70K (02/95) #855 1996 Polo Green LSi ~95K (03/96) #872 1997 Bordeaux Pearl LSi ~55K (08/96) #097 2003 Brilliant Red LS1 Convertible ~29K (04/03) #8951 1999 Magnetic Red LS1 Coupe ~33K (04/99) #6420 My Email | Old Locker | New Locker | Picture of 15 of the 19 |
#3
|
||||
|
||||
Quote:
__________________
_______________ 92svxman & Freida the co-pilot. First 92 Claret(flat color,IMHO) Two 92 Teal(much nicer color) 5 Speed pending, from 93 Legacy Turbo 4.11 Tranny/rear diff. May go for 3.90 Claret 145K Underdrive Pulley from Newbies2005 New timing belt new radiator new water pump new timing belt cover New headlights and harness Replaced exhaust (with stock) Life on the road who could ask for more |
#4
|
|||
|
|||
If you're referring to (what I call) idler pulleys for belt tensioning, I doubt Subaru carries replacement bearings for these; they'd rather you buy the whole assembly. Pretty sure I've read here of someone disassembling and repacking (or replacing?) these, though. You might want to do a search. Good luck.
dcb |
#5
|
||||
|
||||
My dad just replaced the bearing in mine. He did it while I was waiting for the replacement pulley from Subaru. I'm not sure where he got the bearing from.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
#6
|
||||
|
||||
Pulley Assembly
I have been looking for the "Pulley Assembly-Idle Air Conditioner" Part# 73015PA000 which cost $42.37; S&H $7.95 so thats $50.32, but all i need is the Bearing which i found for$8.00 plus $1.16 taxes. What i did find out was that the Pulley was put on backwards, and that was why my A/C belt broke just before the crankshaft pulley came apart. I now have an Underdrive Pulley for the crank, and a new Timing belt to put on after i replace the O-ring behind the Oil Pump along with the oil pump seal. I just don't want to take the Timing belt off again any time soon. Thanks for all the help.
Drive fast, be safe and be happy.
__________________
_______________ 92svxman & Freida the co-pilot. First 92 Claret(flat color,IMHO) Two 92 Teal(much nicer color) 5 Speed pending, from 93 Legacy Turbo 4.11 Tranny/rear diff. May go for 3.90 Claret 145K Underdrive Pulley from Newbies2005 New timing belt new radiator new water pump new timing belt cover New headlights and harness Replaced exhaust (with stock) Life on the road who could ask for more |
#7
|
||||
|
||||
Do you have a part number off the bearing you used, and where did you get it.
I've been tring to track this down for some time now.
__________________
2005 Legacy GT 2002 WRX VF22, Pinks, big TMIC and turbo back 128,*** miles My WRX's Cardomain Page |
#8
|
||||
|
||||
Pulley bearings
There is only one nut that holds the pulley in place, undue nut belt will go loose and remove the wheel and bring it to a shop that rebuilds starters/Alt. and there set you up for under $10. You can also bring it to NAPA and let them look it up, but in either case its going to be cheaper then getting it from Subaru. Good luck. let me know how it goes.
__________________
_______________ 92svxman & Freida the co-pilot. First 92 Claret(flat color,IMHO) Two 92 Teal(much nicer color) 5 Speed pending, from 93 Legacy Turbo 4.11 Tranny/rear diff. May go for 3.90 Claret 145K Underdrive Pulley from Newbies2005 New timing belt new radiator new water pump new timing belt cover New headlights and harness Replaced exhaust (with stock) Life on the road who could ask for more |
#9
|
||||
|
||||
Subaru will only sell you the entire pulley p/n: 34413PA000 for $38.06 on subaruparts.
Reference Link According to the PM I received: Quote:
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
#10
|
||||
|
||||
I think I can get those at work. I'll have to check.
Info I found on this bearing. Its a standed size 6202 LU Bore 15mm OD 35mm W 11mm 15,000 RPM max Contact Sealed Type
__________________
2005 Legacy GT 2002 WRX VF22, Pinks, big TMIC and turbo back 128,*** miles My WRX's Cardomain Page Last edited by AFBeefcake; 01-20-2005 at 02:13 PM. |
#11
|
||||
|
||||
6202 Bearing
Quote:
__________________
_______________ 92svxman & Freida the co-pilot. First 92 Claret(flat color,IMHO) Two 92 Teal(much nicer color) 5 Speed pending, from 93 Legacy Turbo 4.11 Tranny/rear diff. May go for 3.90 Claret 145K Underdrive Pulley from Newbies2005 New timing belt new radiator new water pump new timing belt cover New headlights and harness Replaced exhaust (with stock) Life on the road who could ask for more |
#12
|
||||
|
||||
The Bearing
Quote:
__________________
_______________ 92svxman & Freida the co-pilot. First 92 Claret(flat color,IMHO) Two 92 Teal(much nicer color) 5 Speed pending, from 93 Legacy Turbo 4.11 Tranny/rear diff. May go for 3.90 Claret 145K Underdrive Pulley from Newbies2005 New timing belt new radiator new water pump new timing belt cover New headlights and harness Replaced exhaust (with stock) Life on the road who could ask for more |
#13
|
||||
|
||||
O well I'll have to take the pully off when I rebuld my power steering pump.
__________________
2005 Legacy GT 2002 WRX VF22, Pinks, big TMIC and turbo back 128,*** miles My WRX's Cardomain Page |
#14
|
||||
|
||||
I thought you were referring to the tensioner pulley bearing?
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
#15
|
||||
|
||||
yes, tensioner pulley bearing. I want to replace that at the same time as rebulting my power steering pump.
__________________
2005 Legacy GT 2002 WRX VF22, Pinks, big TMIC and turbo back 128,*** miles My WRX's Cardomain Page |
|
|