SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
ROTORS warped?
DO I HAVE TO GRIND MY CROSS-DRILLED ROTORS? or can I just have them turned like the normal rear rotors?
I've heard conflicting comments! PLEASE ADVISE! [Since the last time (1 1/2 years ago) the rears were the culprits (I replaced with stock rotors from Autozone then), CAN I CROSS DRILL THE STOCK REAR ROTORS MYSELF? BETTER COOLING - less warping] THANKS!!!
__________________
Jim 1995 Laguna Blue SVX AWD L - 240K (daily driver) - "ReBuILT" used engine at 236K miles (6/13) 2013 Veloster Red - Driver Now??Dropsprings [1/2" rear, 1" front] with Koni Strut Inserts> Magnaflow Exhaust System> ECUTune Stage 1av1 Upgrade (from 1v4)> ECUTune TCU MOD> Aluminum Crankshaft Pulley> Stainless Brake Lines> Phenolic Spacers> Perforated Brake Rotors (dint like, OEM now)> SmallCar Shift Kit (resting since TCU MOD)> 7-Position Ground System> High-Pressure Fuel Pressure Regulator (resting)> ATF Cooler & Campaign Filter> Yellow Polish Polyurethane Bushings> Pioneer Double-DIN Stereo with JL AUDIO Speakers> Driveshaft Rebuilt with C-Clip U-Joints> 15 Min MOD> 20 Min MOD .. . (2011) Valentine One Radar Detector with Remote Display - ucan'tseeme! |
#2
|
|||
|
|||
Cross drilling actually causes warping and cracking. If anything, you should have slotted rotors to avoid such issues. Anyway, I'd take them to a shop and have them turned, that should solve your problem.
- Rob |
#3
|
||||
|
||||
If you cross drill your own, round off the corner of the hole at the disk surface. Removal of the sharp edge will help to delay the cracking and you may want to go deeper with the rounding off to allow for wear.
__________________
May your transmission live forever. SuperbVehicleXtraordinary Proud sponsor of a 1992 SVX. |
#4
|
|||
|
|||
TURN or GRIND ??
Beav said "turning works", so I started toward Pep Boys to have all four rotors turned, but they said "no way, we won't do them at all" (something about ruining their lathe!). I put on the extra stock rear (Autozone) rotors I got 1 1/2 years ago [without cross-drilling myself as I had planned (got in a hurry)]. Most all of the pedal "shakes" went away. This happened last time when I assumed it was the fronts and purchased the front cross-drilled rotors from Motorsports.com [when I put them on, the problem remained]. I guess my car (all SVX's?) has a problem warping rear rotors!
IS THIS COMMON? Thanks for your help!
__________________
Jim 1995 Laguna Blue SVX AWD L - 240K (daily driver) - "ReBuILT" used engine at 236K miles (6/13) 2013 Veloster Red - Driver Now??Dropsprings [1/2" rear, 1" front] with Koni Strut Inserts> Magnaflow Exhaust System> ECUTune Stage 1av1 Upgrade (from 1v4)> ECUTune TCU MOD> Aluminum Crankshaft Pulley> Stainless Brake Lines> Phenolic Spacers> Perforated Brake Rotors (dint like, OEM now)> SmallCar Shift Kit (resting since TCU MOD)> 7-Position Ground System> High-Pressure Fuel Pressure Regulator (resting)> ATF Cooler & Campaign Filter> Yellow Polish Polyurethane Bushings> Pioneer Double-DIN Stereo with JL AUDIO Speakers> Driveshaft Rebuilt with C-Clip U-Joints> 15 Min MOD> 20 Min MOD .. . (2011) Valentine One Radar Detector with Remote Display - ucan'tseeme! |
|
|