Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
|
SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#1
03-15-2004, 05:30 PM
|
||||
|
||||
|
wheel bearings in fwd
ok i have diagnosed some wheel bearing failure in my svx. now getting the parts and having the new bearings pressed is the least of my concerns, i have a fwd, are the bearings any different? i don't think so but i need an expert opinion
|
|
#2
03-15-2004, 07:59 PM
|
||||
|
||||
|
Do you mean the front or the rear? The fronts are the same , the rear are very different. I think?
__________________
92 SVX #772 140k 6speed, ECU Tune stage II, Koni/Ground control, 3,270lbs. 91 Legacy Turbo 5spd. FMIC, crappy stock turbo, ACT clutch. 78 BRAT (New toy) (Soon to be EJ22T powered) 90 240 SX. RB25 powered!! DRIFT!!!111!!! (GF's car) To many cars to spend time on teh web!
|
|
#4
03-15-2004, 08:11 PM
|
||||
|
||||
|
Well then, I've never done them on an sVX but if there the same as the Legacys then thay should be alot cheaper and ALOT easier.
__________________
92 SVX #772 140k 6speed, ECU Tune stage II, Koni/Ground control, 3,270lbs. 91 Legacy Turbo 5spd. FMIC, crappy stock turbo, ACT clutch. 78 BRAT (New toy) (Soon to be EJ22T powered) 90 240 SX. RB25 powered!! DRIFT!!!111!!! (GF's car) To many cars to spend time on teh web!
|
|
#6
03-15-2004, 08:53 PM
|
||||
|
||||
|
well looks like i got my hopes up!!!!!!!!! Thanks a lot!!!!!!!!!! they are the same bearings and cost the same amount, and are just as much of a pain in the ass to do!!!!!!!!!!!!!!!!! I do not plan on letting any mech touch my car without my presence, so is there a proceedure with the pressure for application adn any precautions i should take? any advice would be great.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
