The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > MOD Mania > Turbo Projects

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 06-04-2008, 02:09 PM
TomsSVX's Avatar
TomsSVX TomsSVX is offline
Maniac modifier
 
Join Date: Dec 2003
Location: Branchburg, New Jersey
Posts: 15,489
Registered SVX Classic SVX
Turbo kit, who would be SERIOUSLY interested??

I have full intentions of building a turbo system for my Silver... I have been toying with the idea of offering a full kit w/ standalone engine management as well... There would be two versions.

1st would be a mild kit for a stock engine... Basic maps that allow the car to be driven but the car would need its own individual tune. More than likely using a Gt35r with a large front mount. Possible cost would be as low as $7k.

2nd would be a more aggressive kit for a built engine. Once again basic maps to keep you from blowing it up, but still needs to be tuned. Using a Gt4088R and a larger front mount intercooler. Possible cost would be as low as $8500.

Hot side piping would be made of stainless. For the stock motor pipes that join from the stock manifolds would be used.Built systems would have 1.5" Headers collecting just before the turbo.

Cold side piping will be 2.5" aluminum on the stock kits... 3" on the built kits.

These are rough plans as of now. I need to get my standalone first dialed in for the motor N/A then the turbo build will come shortly after... More or less I would like to know who has the resources and the intention of actually buying this? Otherwise I can simply make a one-off for myself and call it a day.

Tom
Reply With Quote
  #2  
Old 06-04-2008, 02:21 PM
joe62890 joe62890 is offline
SVXless
 
Join Date: Oct 2007
Location: North Little Rock, Arkansas
Posts: 167
I'm interested in this.

What are we looking at needing to have mod wise? I am assuming since you are going to be using a standalone management that a MT is going be to a must. Does the standalone support emission compliant components or will the car have to be modified to eliminate these components in order to allow the standalone to function properly.

Also out of curiosity, what kind of gains are we looking at HP/TQ wise, as well as, how many pounds of boost can a stock motor hold. How many pounds of boost can a motor built with the ECUTune components hold and how would using those in addition to the turbo effect the HP/TQ numbers and how many pounds of boost can be ran. If the gains with the ECUTune components as well as the turbo kit are a large jump over just the kit alone, what other parts would need to be upgraded? Drivetrain?

Sorry to bombard you with a million questions (some of them probably not very relevant) but I'm just a curious little monkey.
Reply With Quote
  #3  
Old 06-04-2008, 02:32 PM
TomsSVX's Avatar
TomsSVX TomsSVX is offline
Maniac modifier
 
Join Date: Dec 2003
Location: Branchburg, New Jersey
Posts: 15,489
Registered SVX Classic SVX
Quote:
Originally Posted by joe62890 View Post
I'm interested in this.

What are we looking at needing to have mod wise? I am assuming since you are going to be using a standalone management that a MT is going be to a must. Does the standalone support emission compliant components or will the car have to be modified to eliminate these components in order to allow the standalone to function properly.
The kits would eliminate the EGR system, IRIS system, and purge control system. I am looking further into what it is going to take to keep the Auto but I have no definitive answer as of now.


Quote:
Also out of curiosity, what kind of gains are we looking at HP/TQ wise, as well as, how many pounds of boost can a stock motor hold. How many pounds of boost can a motor built with the ECUTune components hold and how would using those in addition to the turbo effect the HP/TQ numbers and how many pounds of boost can be ran. If the gains with the ECUTune components as well as the turbo kit are a large jump over just the kit alone, what other parts would need to be upgraded? Drivetrain?
Gains would more than likely be in the 50-60% range on a stock motor. This is mostly due to the fact that you are fighting a 10:1 compression ratio and they are going to be built to run pump gas. More than likely limited to 9-10 psi. I cannot tell you what the ECUtune engine will do. I personally am using the bottom end that I had from him and building my own heads using different valves, springs, retainers, and converting to bucket&shim for the lifters. This way I can choose my own cam profiles and not have to deal with hydraulic lifters. With the lower compression your gains can be much more substantial and fully expect over 100% gains.

Quote:
Sorry to bombard you with a million questions (some of them probably not very relevant) but I'm just a curious little monkey.
I posted this to answer questions and yield interest in it. I may also need someone interested with an auto to lend me their car for an unknown period of time... but that is merely for trying to keep the auto with the new EM.

Tom
Reply With Quote
  #4  
Old 06-04-2008, 02:40 PM
Myxalplyx's Avatar
Myxalplyx Myxalplyx is offline
XT6 is SVX's Daddy
 
Join Date: Apr 2002
Location: New Castle, DE
Posts: 1,113
Send a message via ICQ to Myxalplyx Send a message via AIM to Myxalplyx Send a message via Yahoo to Myxalplyx
Quote:
Originally Posted by TomsSVX View Post
I posted this to answer questions and yield interest in it. I may also need someone interested with an auto to lend me their car for an unknown period of time... but that is merely for trying to keep the auto with the new EM.

Tom
Ahem! So.....the first initial kit would be free for the person lending you an SVX for an 'unknown' amount of time?
__________________
Kevin Thomas
1997 2.2ltr Subaru Impreza Outback Sport Wagon (AWD/Auto) 13.03@100mph
1989 2.7ltr Subaru XT6 (AWD/Auto) 15.912@85.93mph
1996 3.3ltr SVX (AWD/Auto) 15.070@91.38mph
***R.I.P***
2010 RAV4 AWD Sport (13.717 @ 99.19mph )
2015 Honda Fit LX CVT (15.2 @ 90mph)
Reply With Quote
  #5  
Old 06-04-2008, 02:55 PM
joe62890 joe62890 is offline
SVXless
 
Join Date: Oct 2007
Location: North Little Rock, Arkansas
Posts: 167
Quote:
Originally Posted by Myxalplyx View Post
Ahem! So.....the first initial kit would be free for the person lending you an SVX for an 'unknown' amount of time?
**** if that's the case I'm on my way.
Reply With Quote
  #6  
Old 06-05-2008, 10:52 AM
SVXMAN2001 SVXMAN2001 is offline
Registered User
 
Join Date: May 2001
Location: long island, NY
Posts: 2,033
Send a message via AIM to SVXMAN2001
Definately interested. How soon do you plan on offering these kits? In reference to the standalone, the feeling I got was that you would set it up but we would still have to get it properly/finely tuned by another party, is that correct?
Reply With Quote
  #7  
Old 06-05-2008, 11:03 AM
TomsSVX's Avatar
TomsSVX TomsSVX is offline
Maniac modifier
 
Join Date: Dec 2003
Location: Branchburg, New Jersey
Posts: 15,489
Registered SVX Classic SVX
No single tune works well across applications. So the ECU would be programmed with basic maps. This would require it to be brought to a specialist to be Dyno tuned and street tuned. This is the BEST way to get all of what you paid and worked for. In short, yes.

Tom
Reply With Quote
  #8  
Old 06-05-2008, 02:09 PM
LetItSnow's Avatar
LetItSnow LetItSnow is offline
Still Cant' Say the Z-Word
 
Join Date: Mar 2007
Location: Syracuse, NY
Posts: 2,338
Send a message via AIM to LetItSnow
Registered SVX
Straight up wrenching, or will there be notable modification to the car to get it to fit (cutting, welding, wateva)?
__________________
Disclaimer: The above post is on the internet.
Reply With Quote
  #9  
Old 06-05-2008, 02:13 PM
TomsSVX's Avatar
TomsSVX TomsSVX is offline
Maniac modifier
 
Join Date: Dec 2003
Location: Branchburg, New Jersey
Posts: 15,489
Registered SVX Classic SVX
For the most part it should be bolt in... Thats the whole idea of it. The one thing I know for sure that will need to be cut is the bumper support in the front... This is going to be in the way of the intercooler. Also something that should definitely be noted is that more than likely the user would have to lose the air conditioning for the same space constraint issue

Tom
Reply With Quote
  #10  
Old 06-07-2008, 11:37 AM
Nomad Nomad is offline
The car named NIGHTMARE
 
Join Date: Jan 2005
Location: Trois-Rivieres , Québec
Posts: 304
Send a message via MSN to Nomad
Hi Tom ,
I have a Ecu Tune auto tranny With 3.90 dif . I already trashed the AC.
Wasnt working anymore and i'm in a weight reduction phase right now . I will ask LAN to build me an engine with 9.3 Comp. With cams , pistons , rods , ect. After that ( in a year ) I'm buying your Kit but cannot lend my car as its my daily driver and i'm too far ( Québec ) ... But i'll buy it !
__________________
Nightmare is the name of the car...
Reply With Quote
  #11  
Old 06-08-2008, 11:15 AM
black beast black beast is offline
Back Road Blazer
 
Join Date: Jan 2005
Location: New Boston, NH
Posts: 501
Send a message via AIM to black beast
Hell if your gunna give a free kit to the test, I would drive it down there myself. I am having fuel issues right now but by next weekend that will all be fixed.

But I would have to cage match all the other ppl willing to lose there car for a while. LOL
__________________
-Chris
'94 ebony pearl, with orange "silicone" hoses, painted beauty cover, Tom's Intake, Dayles Cold air intake; with HKS mega suction foam air filter, 3in header back exhaust, STI ground wires, euro front fascia, euro front grill, reactive 17in wheels, Nitto Invo's, Drilled and slotted rotors, stainless break lines, Koni strut inserts, Drop springs, 5MT, shotshifter, Clutchmasters clutch, ACT prolite flywheel, EL Glow gauges, The ECUTune stage 2. To Do: Cams, port and polish, etc.
Reply With Quote
  #12  
Old 06-08-2008, 11:30 AM
It's Just Eric's Avatar
It's Just Eric It's Just Eric is offline
Missing in action
 
Join Date: Oct 2005
Location: Tuckerton, NJ, USA
Posts: 3,027
Send a message via AIM to It's Just Eric
Registered SVX
I dont think the test fit kit would be free, especially because the big thing we're working against is making the new em work with an auto...the piping and fitting of the turbo can easilly be taken care of on one of our cars.
__________________
R.I.P Cool Signature.
You're gone but not forgotten. I mean, sure, I kindof don't remember some of the finer details..but I remember you were funny, and at one point you said spaghetti in Dutch....but definantly not forgotten

Reply With Quote
  #13  
Old 06-08-2008, 01:33 PM
Phast SVX's Avatar
Phast SVX Phast SVX is offline
BOOOOOOOOOOOOOOOOOST
 
Join Date: Feb 2001
Location: Madison, WI
Posts: 2,800
Send a message via AIM to Phast SVX
This is definetly a sawzall deal. I ended up cutting three holes in the engine bay and a lot of work on the bumper support
One for the intake to the fender(enlarging the stock hole to the )

One for the intercooler outlet from the turbo
One on the driver side

The bumper support.

Forget a cut-off wheel. The Bumper support is near impossible to cut with a torch due to a multi-layer steel design. I ended up using an entire bottle of 02.
__________________
~Phil
Teal 1992 Subaru SVX Turbo - Sold in May 2011 to peace-frog.

Last edited by Phast SVX; 06-08-2008 at 01:40 PM.
Reply With Quote
  #14  
Old 06-08-2008, 01:37 PM
TomsSVX's Avatar
TomsSVX TomsSVX is offline
Maniac modifier
 
Join Date: Dec 2003
Location: Branchburg, New Jersey
Posts: 15,489
Registered SVX Classic SVX
Quote:
Originally Posted by Phast SVX View Post
This is definetly a sawzallI ended up cutting three holes in the engine bay.
One for the intake to the fender(enlarging the stock hole to the )
One for the intercooler outlet from the turbo
One on the driver side

The bumper support. Forget a cut-off wheel. The Bumper support is near impossible to cut with a torch due to a multi-layer steel design. I ended up using an entire bottle of 02.

You are right, I noticed that when you did yours, but I would really try and focus on trying not to cut too much even if it makes it harder. I am also thinking of locating the turbo somewhere else too but this will all come with time and investigation

Tom
Reply With Quote
  #15  
Old 06-08-2008, 08:00 PM
Myxalplyx's Avatar
Myxalplyx Myxalplyx is offline
XT6 is SVX's Daddy
 
Join Date: Apr 2002
Location: New Castle, DE
Posts: 1,113
Send a message via ICQ to Myxalplyx Send a message via AIM to Myxalplyx Send a message via Yahoo to Myxalplyx
Phast SVX,

Did you ever get 1/4 mile numbers for your setup? Sorry if I missed it. I have been out of the loop off and on.
__________________
Kevin Thomas
1997 2.2ltr Subaru Impreza Outback Sport Wagon (AWD/Auto) 13.03@100mph
1989 2.7ltr Subaru XT6 (AWD/Auto) 15.912@85.93mph
1996 3.3ltr SVX (AWD/Auto) 15.070@91.38mph
***R.I.P***
2010 RAV4 AWD Sport (13.717 @ 99.19mph )
2015 Honda Fit LX CVT (15.2 @ 90mph)
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:02 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122