The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Technical Q & A
Register FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Display Modes
  #1  
Old 06-01-2009, 04:27 PM
WestCoastSVX's Avatar
WestCoastSVX WestCoastSVX is offline
Was MacGyver
 
Join Date: May 2001
Location: West Coast
Posts: 3,677
Registered SVX
Intake manifold removal

There are actually 2 step-by-step write-ups in the How To documents that detail removing the intake manifold. But both are basically lists of things to remove while doing this process and assume the reader knows what all these parts are and where they are located. I'll be the first to admit, I don't!

I think as these cars continue to get older, this is going to be more and more necessary with hoses under there cracking and such - I had a coolant hose burst under there. Also, polishing, powdercoating, etc are getting popular so people will be interested in the process for that purpose too. And I can't be the only one baffled by how to do this, can I?

Just saying, the next time someone that knows what they are doing goes through the process, if they would be so kind as to do a more thorough "Idiot's Guide" and take a ton of good pictures at each step of the way, it might be handy and add value to this site.
__________________
Troy

1992 SVX LSL "Serenity" 250,000 miles!

I don't care, I'm still free, You can't take the sky from me...
Reply With Quote
  #2  
Old 06-01-2009, 05:54 PM
Sean486's Avatar
Sean486 Sean486 is offline
Happy SVX
Subaru Silver Contributor
 
Join Date: Jul 2005
Location: Mechanicsburg, PA
Posts: 3,407
Registered SVX
Re: Intake manifold removal

Agreed, that would nice for the auto repair dummies like myself.
__________________
1992 LSL ebony pearl 170k - Thank you Ron Mummert
Reading Box of Wine Car
-----------------------------------
1992 SVX LSL 5-Speed Sold at 180K 2019
1995 SVX Lsi Polo Sold at 118K 2007
Reply With Quote
  #3  
Old 06-02-2009, 05:02 PM
WestCoastSVX's Avatar
WestCoastSVX WestCoastSVX is offline
Was MacGyver
 
Join Date: May 2001
Location: West Coast
Posts: 3,677
Registered SVX
Re: Intake manifold removal

I will add that I would be willing to do all the picture taking and documenting if I could observe an expert doing this piece by piece and explaining what they are doing along the way.
__________________
Troy

1992 SVX LSL "Serenity" 250,000 miles!

I don't care, I'm still free, You can't take the sky from me...
Reply With Quote
  #4  
Old 06-10-2009, 06:28 PM
SoCal LS-L's Avatar
SoCal LS-L SoCal LS-L is offline
Avalanche Alcyoneer
Subaru Silver Contributor
 
Join Date: Sep 2008
Location: Reno, NV
Posts: 2,130
Registered SVX
Re: Intake manifold removal

I could definitely do this and upload the step by step pics, im suspecting my IAC is going out and need to clean/test it ($334.00 OUCH!!).

I have not been able to locate Intake Manifold Gaskets or TB gasket for our engine. Ive tried my main 3: Autozone, Rockauto, and SubaruGenuineParts to no avail. Does anyone know where to find these gaskets??
__________________
Chris

"A person convinced against their will, is of the same opinion still"

New?? Find the downloadable SVX Online Service Manual Here
RECOMMENDED READING for newer SVX owners Here some cool info if not fully accurate.
Reply With Quote
  #5  
Old 06-10-2009, 06:49 PM
redlightningsvx's Avatar
redlightningsvx redlightningsvx is offline
Collision Refinishing Tech
 
Join Date: Aug 2007
Location: Huntingdon, PA
Posts: 2,279
Registered SVX
Re: Intake manifold removal

subaruparts.com or dealer. You might as well throw on some thermo spacers will it's off. http://www.outlawengineering.com/index.html
__________________
Seth
94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold
Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats
Soon to come:Fiberglass hood, upholster ALL suede to black leather
Past subies:

92' Pearl White/black top LS-L-SOLD
96' Legacy Outback-TOTALED
99' Legacy Outback Limited 30th anniversary edition-TOTALED
98' Forester L -Totaled
Other toys:
99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap
06' B9 Tribeca-Stock
1982' Yamaha xj650 Maxim
Mods:
work in progress
Reply With Quote
  #6  
Old 06-10-2009, 06:54 PM
NikFu S.'s Avatar
NikFu S. NikFu S. is offline
Takin tools to task
 
Join Date: May 2003
Location: A-town, Alaska
Posts: 7,280
Send a message via MSN to NikFu S.
Registered SVX
16175AA091 Throttle Chamber Gasket

14035AA140 Gskt Intake Manifold

14075AA021 Gskt Intake Collector
__________________
"That which can be asserted without evidence
can be dismissed without evidence."


'92 Dark Teal SVX LS-L, >146,000m
3 pedals, 5 speeds., restoration underway.
2012 Honda Insight, slow but cute.
Reply With Quote
  #7  
Old 06-10-2009, 07:31 PM
SoCal LS-L's Avatar
SoCal LS-L SoCal LS-L is offline
Avalanche Alcyoneer
Subaru Silver Contributor
 
Join Date: Sep 2008
Location: Reno, NV
Posts: 2,130
Registered SVX
Re: Intake manifold removal

Thanks fellas, I checked out the thermoblock spacers and didnt see an app for any subarus......
__________________
Chris

"A person convinced against their will, is of the same opinion still"

New?? Find the downloadable SVX Online Service Manual Here
RECOMMENDED READING for newer SVX owners Here some cool info if not fully accurate.
Reply With Quote
  #8  
Old 07-23-2009, 05:43 PM
alia176 alia176 is offline
Registered User
 
Join Date: Nov 2002
Location: Tijeras, NM
Posts: 583
Send a message via Yahoo to alia176
Re: Intake manifold removal

Quote:
Originally Posted by SoCal LS-L View Post
I could definitely do this and upload the step by step pics, im suspecting my IAC is going out and need to clean/test it ($334.00 OUCH!!).

I have not been able to locate Intake Manifold Gaskets or TB gasket for our engine. Ive tried my main 3: Autozone, Rockauto, and SubaruGenuineParts to no avail. Does anyone know where to find these gaskets??
I just removed the intake manifold today and took lots of pics. I was hoping to include pics directly into a thread w/o using Photobucket (I may delete the pics or reorganize them). Can this site handle pics or do they come in as "attachments" only?
__________________
If it ain't broken it, doesn't have enough features!!!

'92 SVX LSL
'03 4Runner
'96 FZJ80 Landcruiser
'90 Mercedes 300E
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:28 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122