The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Technical Q & A

Reply
 
Thread Tools Display Modes
  #1  
Old 03-07-2012, 03:15 PM
Sean486's Avatar
Sean486 Sean486 is offline
Happy SVX
Subaru Silver Contributor
 
Join Date: Jul 2005
Location: Mechanicsburg, PA
Posts: 3,406
Registered SVX
Side cladding question

I have a piece of the side cladding that sits between the drivers door and rear wheel. All the holes on the sides and bottom are good but we noticed that the piece on the inside has two of the three holes torn out. The question is will this make any difference when installing it?

Broken are


This piece
__________________
1992 LSL ebony pearl 170k - Thank you Ron Mummert
Reading Box of Wine Car
-----------------------------------
1992 SVX LSL 5-Speed Sold at 180K 2019
1995 SVX Lsi Polo Sold at 118K 2007
Reply With Quote
  #2  
Old 03-07-2012, 06:15 PM
1986nate 1986nate is offline
Senior Member
Subaru Silver Contributor
 
Join Date: Sep 2008
Location: Meadville, PA-but I'll still travel
Posts: 4,672
Registered SVX
Re: Side cladding question

This is for the "studs" from the garnish holder that the 10mm nuts thread onto. You can't get those into place unless it's notched
Reply With Quote
  #3  
Old 03-07-2012, 08:47 PM
Sean486's Avatar
Sean486 Sean486 is offline
Happy SVX
Subaru Silver Contributor
 
Join Date: Jul 2005
Location: Mechanicsburg, PA
Posts: 3,406
Registered SVX
Re: Side cladding question

Quote:
Originally Posted by 1986nate View Post
This is for the "studs" from the garnish holder that the 10mm nuts thread onto. You can't get those into place unless it's notched
So you are saying it is normal?
__________________
1992 LSL ebony pearl 170k - Thank you Ron Mummert
Reading Box of Wine Car
-----------------------------------
1992 SVX LSL 5-Speed Sold at 180K 2019
1995 SVX Lsi Polo Sold at 118K 2007
Reply With Quote
  #4  
Old 03-07-2012, 11:58 PM
redlightningsvx's Avatar
redlightningsvx redlightningsvx is offline
Collision Refinishing Tech
 
Join Date: Aug 2007
Location: Huntingdon, PA
Posts: 2,279
Registered SVX
Re: Side cladding question

Yes that is normal.
__________________
Seth
94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold
Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats
Soon to come:Fiberglass hood, upholster ALL suede to black leather
Past subies:

92' Pearl White/black top LS-L-SOLD
96' Legacy Outback-TOTALED
99' Legacy Outback Limited 30th anniversary edition-TOTALED
98' Forester L -Totaled
Other toys:
99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap
06' B9 Tribeca-Stock
1982' Yamaha xj650 Maxim
Mods:
work in progress
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:10 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122