SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Help Needed On Seatbelt & Codes
My drivers side seatbelt will not move back when door is closed. If i manually move it back then open door, it goes to forward postion just fine. I have searched & read for hours these forums. I tried finding the codes & when I insert diag jumper into what i think is #8 the seatbelt light stops flashing, the others besides #2 just keeps flashing. the engine codes check out ok. the seatbelt light flashes constintly & the door ajar light funtions properly when I open & close driver door. im think its the control unit, because it keeps flashing when jumping?? any help would be greatly appreciated. thanks
|
#2
|
||||
|
||||
im going to say its the motor and maybe the track you might be able to find a new one at a junk yard or from another member or just convert your car to the manual lap belts
__________________
- John ASE certified Master Tech W/ X1 Twin City Fleet repair, St. Paul, MN need work done? Have tools will travel
|
#3
|
|||
|
|||
the motor works going forward just not to back position?
|
#4
|
||||
|
||||
I would get a new control box and try that. That has solved many of the problems that have been unanswered. Thay don't cost that much used and is an easy fix.
__________________
. Earl .... ... .... ><SVX(*> Subaru Ambassador [COLOR=”silver”]1992 Tri Color L[/COLOR] ~45K (06/91) #2430 1992 Dark Teal LS-L ~184K (05/91) #0739 1992 Claret LS-L ~196K (05/91) #0831 1992 Pearl LS-L ~103K (06/91) #1680 1992 Pearl LS-L ~151K (06/91) #2229 1992 Dark Teal LS ~150K (07/91) #3098 (parts car) 1992 White LS-L ~139K (08/92) #6913 1993 25th AE ~98K (02/93) #164 1993 25th AE ~58K (02/93) #176 1993 25th AE ~107K (02/93) #215 1993 25th AE ~162K (02/93) #223 1994 Laguna Blue Pearl LSi ~124K (1/94) #2408 1994 Laguna Blue Pearl LSi ~144K (10/93) #1484 1994 Laguna Blue Pearl LSi ~68K (10/93) #1525 1994 Barcelona Red LSi ~46K (02/94) #2624 1994 Pearl LSi ~41K (12/93) #1961 1995 Bordeaux Pearl LSi ~70K (02/95) #855 1996 Polo Green LSi ~95K (03/96) #872 1997 Bordeaux Pearl LSi ~55K (08/96) #097 2003 Brilliant Red LS1 Convertible ~29K (04/03) #8951 1999 Magnetic Red LS1 Coupe ~33K (04/99) #6420 My Email | Old Locker | New Locker | Picture of 15 of the 19 |
#5
|
|||
|
|||
That sound good, im going to try that & see if thats it. I messed with the wires today, nothing better. So i manually put in back position & unpluged it so it would stay back to drive. Also my interior light is out not sure if it bulb or not. Mess with that tomorrow.
|
#6
|
||||
|
||||
Rear window switch
Try pluggin the motor in to your rear window switch. The plug for the rear window is the same as your seatbelt motor and is in the back panel near the wires for your seatbelt. You can then move the seatbelt back and forth with your window switch. Of course your rear window will not roll down but I never use mine anyway. Now... If I can just fix my drivers window and the severe engine hesitation and droopy visor I might have a decent car.
|
#7
|
|||
|
|||
i installed controll unit & all is fixed
thanks to all those who posted replys to this thread |
Thread Tools | |
Display Modes | |
|
|