SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
trans Cooler size????
Hello,
I am in the process of ordering a cooler from Summit Racing and see that there are coolers 3/4" and 1.5" thick as well as diferent overall dimensions. For those of you who have already installed one, what is the largest cooler that will fit between the rad and the condensor? Thanks for the help Hotshoe |
#2
|
||||
|
||||
I have not done this yet to mine but if I recall correctly, 3/4 inch will just sandwich tightly between the two. There are plenty of threads pertaining to this if you do a search and I know the info is in there. Good luck and let me know how it goes
__________________
Pearl '92 LS-L 179K (Historic 1st 5-speed SVX) Mods: 5-speed, 4.11's, Group-N motor mounts, dual Magnaflows, cone air filter, Kenwood MP-228 CD/Receiver, white-faced gauges, '97 grill, custom window tinting. Ebony Mica '92 LS 80K Oct 2002 - Dec 2004: Victim of theft. She served me well. You can tell the lack of craftsmanship by the wrinkles in the duct tape. |
#3
|
|||
|
|||
biggest size
I tell you what I did and you can decide if it might work for you.
I took 2 16,000 GVW and attached them end-to-end. I had to shorten the output from one and the input from another to make them fit, but it wasn't anything too drastic. Except for about 4", it literally covers the whole surface of the radiator. Maybe this was a bit of overkill, I don't know. But, my car has 112k miles and I"ve never had a problem with the trans yet. |
Thread Tools | |
Display Modes | |
|
|