The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Technical Q & A

Reply
 
Thread Tools Display Modes
  #1  
Old 06-08-2007, 05:11 AM
DarknessofDeath's Avatar
DarknessofDeath DarknessofDeath is offline
Inhabitant of Darkness
 
Join Date: Nov 2005
Location: first layer of hell
Posts: 1,232
Registered SVX
manual gearbox owner question

i was wondering what everyone or anyone is using to reduce noise where the shift stick is? sometimes the noise isn't that bad and sometimes it really rattles.
thanks
__________________
1992 Subaru SVX LS~L Ebony Pearl
1992 Dodge Stealth R/T Firestorm Red
1992 Subaru SVX LS~L Pearl White
1992 Subaru SVX LS~L Ebony Pearl JDM 6MT/DCCD
2007 Subaru Legacy Spec B. Diamond Grey Metallic
Reply With Quote
  #2  
Old 06-08-2007, 08:14 AM
huck369's Avatar
huck369 huck369 is offline
Inventor of the 5-speed swap
 
Join Date: May 2001
Location: Somerset, KY
Posts: 5,604
Significant Technical Input Registered SVX
Quote:
Originally Posted by DarknessofDeath
i was wondering what everyone or anyone is using to reduce noise where the shift stick is? sometimes the noise isn't that bad and sometimes it really rattles.
thanks

If it really "Rattles" then you probably need new shifter bushings, or the little spring on the shifter to hold it off to one side.
If everything is as it should be, the shifter should not rattle at all.
__________________
Huck
Subaru Ambassador
92 SVX LS-Tour Magnaflow Exhaust, 5-Spd-AWD
88 XT6 AWD 5-Speed "Bride of FrankenWedge"
15 Impreza Premium Sedan
15 Crosstrek XV 5-Speed
My 5-Speed "How-To" Write-up
1976 Pontiac Firebird Formula
Current Count of Subaru's Owned.... "70"
Reply With Quote
  #3  
Old 06-08-2007, 08:45 AM
benebob's Avatar
benebob benebob is offline
Have a poncho I can borrow?
 
Join Date: May 2001
Location: Lancaster, PA
Posts: 6,561
Quote:
Originally Posted by huck369
If it really "Rattles" then you probably need new shifter bushings, or the little spring on the shifter to hold it off to one side.
If everything is as it should be, the shifter should not rattle at all.
Also it will rattle if the bushings are overtighened in there as well. Some slop is good, no slop or too much slop means rattling! I'd go with Hucks diagnosis unless the bushings were replaced on the swap or were retightned when shortening or lenthening the shifter rod.
__________________
British vehicles are my last ditch attempt to keep the nasty Italian thoughts in my mind at bay. So far its working.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122