SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
05 STi hubs on a SVX
Has anyone tried this yet? Im seriously thinking about it. It would mean much more options brake and suspension wise. Im pulling a svx hub off this weekend and ordering a STi on Tues to see how diff they are and if it would work.
|
#2
|
||||
|
||||
I'd be astounded if the '05 STi hubs were a direct fit onto an SVX, but I'd be ecstatic if the STi hubs do fit.
__________________
Mychailo :: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ :: 1995 Laguna Blue SVX L AWD 5MT (sold) Visit my locker SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads. |
#3
|
|||
|
|||
Im thinking the bearing are the same, and so are the bolt patern, so why not give a try?
|
#4
|
||||
|
||||
I heard that they were exactly the same from one person, but I stuck my head under an 05 and the ball joint on the STI still bolts through the control arm like every other Subaru (sans SVX) so it is definitly not an SVX spindal. It maybe an SVX bearing and hub though, and the brakes and struts still might work.
__________________
92 SVX #772 140k 6speed, ECU Tune stage II, Koni/Ground control, 3,270lbs. 91 Legacy Turbo 5spd. FMIC, crappy stock turbo, ACT clutch. 78 BRAT (New toy) (Soon to be EJ22T powered) 90 240 SX. RB25 powered!! DRIFT!!!111!!! (GF's car) To many cars to spend time on teh web! |
#5
|
||||
|
||||
Quote:
__________________
British vehicles are my last ditch attempt to keep the nasty Italian thoughts in my mind at bay. So far its working. |
#6
|
||||
|
||||
Quote:
Would the SVX Ball Joint fit into the STi Spindal???
__________________
Dave - 03 Baja - 92 SVX - 86 Brat - 08 OB 3.0 |
#7
|
||||
|
||||
Quote:
Yeah, there would be a problem with the sway bar mounting if you were to use the STI struts. (no sway bar mount on the strut body)
__________________
92 SVX #772 140k 6speed, ECU Tune stage II, Koni/Ground control, 3,270lbs. 91 Legacy Turbo 5spd. FMIC, crappy stock turbo, ACT clutch. 78 BRAT (New toy) (Soon to be EJ22T powered) 90 240 SX. RB25 powered!! DRIFT!!!111!!! (GF's car) To many cars to spend time on teh web! |
#8
|
||||
|
||||
Quote:
No, the SVX ball joint mounts to the control arm and the tapered stud bolts in to the spindal, the STI ball joint mounts to the spindal and the tapered studs bolts to the control are. compleatly differend design.
__________________
92 SVX #772 140k 6speed, ECU Tune stage II, Koni/Ground control, 3,270lbs. 91 Legacy Turbo 5spd. FMIC, crappy stock turbo, ACT clutch. 78 BRAT (New toy) (Soon to be EJ22T powered) 90 240 SX. RB25 powered!! DRIFT!!!111!!! (GF's car) To many cars to spend time on teh web! |
#9
|
|||
|
|||
What about filing down the area that the strut fits over the knuckle so a WRX or legacy strut would fit?
|
#10
|
||||
|
||||
Well if the bolt spread is the same then yes, you could probly mill down the splindal to work with a WRX strut.
__________________
92 SVX #772 140k 6speed, ECU Tune stage II, Koni/Ground control, 3,270lbs. 91 Legacy Turbo 5spd. FMIC, crappy stock turbo, ACT clutch. 78 BRAT (New toy) (Soon to be EJ22T powered) 90 240 SX. RB25 powered!! DRIFT!!!111!!! (GF's car) To many cars to spend time on teh web! |
|
|