SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Muffler rattle sound
My black 95 has had a muffler rattle since I bought it years ago. Someone told me there is an inexpensive solution for this and the it occurs often.
Anyone know about rather this is common and is it easily fixed. |
#2
|
||||
|
||||
where is the rattle coming from??
There are heat shields all over the exaust, its most likley one of them, just remove it Cheers, Jake
__________________
1992 Pearl / Black SVX removed intake silencer, k&N pannel filter, trans cooler, 94 JDM 4eat, Noltec front swaybar mounts, Motorsport D&S disks with EBC Greenstuff pads |
#3
|
|||
|
|||
Holy ****.
I'll check for the heat shields. Thanks. |
#4
|
||||
|
||||
If it happens only at specific RPM's go after the heat shields. My ford had two screws come loose and the heat shield rattled like a ***** from 1100-1300 RPM. Either remove them, or screw them back into place.
__________________
Chris 92 Ebony Mica LS-L "A Rolling Restoration": 223,250 KM - Sleeping 2007 STi 6MT, Stance GR+ coilovers, PWR Rad, JDM hood badge, svxfiles 6000K HIDs, JDM Clear Corners, $15/15 min mod, $20/20 min mod, Energy Swaybar Bushings, Hella Supertones horns, Gold STi BBS rims, Group A lightweight crank pulley, A/C system removed, Custom header-back exhaust, Hybrid carbon/metal rear sway bar, restored headlights with CCFL halos 2008 Subaru Legacy Spec B - Diamond Grey Metallic - Sold 2020 Ram 1500 Longhorn - Red Pearl |
#5
|
||||
|
||||
If it is not the heat shield it will be the centre "Hot Dog" (Oz Name). Just cut it out and put a pice of straight pipe in.
Tony
__________________
1995 - SVX 700,000 K Mine, DMS Struts to lift car 2in. Tyres Wrangler Silent Armor 235/70R16, PBR Radiator. 6 speed with DCCD and R180 rer diff, Heavy duty top strut mounts front and rear. Speedo correction box fitted. New stero (gave up on the old one). Back seat removed and 2 spare tyres fitted for desert driving. ECUTune SC sitting in the box for the next SVX. 1992 - SVX 255 K Wife (Want to stay Married so not allowed to fit SC) 1992 - SVX Pearl with black roof race car roll cauge etc ready to race. Ex Tasman Targa car. 1995 - SVX Green low k mint condiation. 1995 - SVX Rally car, ex Matts car. Now to be used on track. 1992 - SVX red & Black being converted to Mid Engine. 1995 - SVX Red 143,000 bit rough. Owned 5 others Subaru back to a 1974 1400 GSR. |
#6
|
|||
|
|||
My vote goes to the heat shield. Both of mine rattle when I close the boot (and seemingly ALL of 'em on the silver rattlle at hight idle).
dcb |
#7
|
||||
|
||||
Even if the bolts hang on, the mess that insulates the pipes wears out and eventually you get metal to metal noise.
The only ones I ever leave on are the ones welded to the manifold.
__________________
-Mike ECUTune2v7 - 4.11 5 Speed - Sprung 6 Puck Clutch - D&S Rotors - SS Brake & Clutch Lines - HKS Panel Filter - HeaderBack Exhaust -80GB Hard Drive - GroupN Engine Mounts - - some other "tricks"
[SIGPIC][/SIGPIC] In progess: track down mystery noise <-identified, paint the new dash, get better pic Spring plans: Replace Trans - Integrate ECU with the carputer - Suspension - Go back to STI Filter - Paint? Maybe not - Next Oil change: Purolator L30165 Member #995 | My Locker | My New Locker Catch you next at: ? Auto-X ? |
Thread Tools | |
Display Modes | |
|
|