SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
High presure power sterring hose leak where to get one?
Well the leak has gotten worse, and its time for a replacment, no parts store has one, and no hydralic store that ive been to has the magical ends that will work so they would be able to make up a new one for a decent price. I called up the dealer and they said my, rare style 1st designed one will cost around 131 dollors with tax, which is a high for some strong rubber and metal fitttings. So i was wondering if i could switch to a newer style one that cost less? Thanks
|
#2
|
|||
|
|||
The subaru dealer is your only option.
|
#3
|
||||
|
||||
yeah but can I convert to a newer, and cheaper style hose?
|
#4
|
||||
|
||||
No, it has to have the right fittings for it to fit properly. Check Subaruparts . com for the hose Here It is #16 and is $76.19. Good luck.
__________________
. Earl .... ... .... ><SVX(*> Subaru Ambassador [COLOR=”silver”]1992 Tri Color L[/COLOR] ~45K (06/91) #2430 1992 Dark Teal LS-L ~184K (05/91) #0739 1992 Claret LS-L ~196K (05/91) #0831 1992 Pearl LS-L ~103K (06/91) #1680 1992 Pearl LS-L ~151K (06/91) #2229 1992 Dark Teal LS ~150K (07/91) #3098 (parts car) 1992 White LS-L ~139K (08/92) #6913 1993 25th AE ~98K (02/93) #164 1993 25th AE ~58K (02/93) #176 1993 25th AE ~107K (02/93) #215 1993 25th AE ~162K (02/93) #223 1994 Laguna Blue Pearl LSi ~124K (1/94) #2408 1994 Laguna Blue Pearl LSi ~144K (10/93) #1484 1994 Laguna Blue Pearl LSi ~68K (10/93) #1525 1994 Barcelona Red LSi ~46K (02/94) #2624 1994 Pearl LSi ~41K (12/93) #1961 1995 Bordeaux Pearl LSi ~70K (02/95) #855 1996 Polo Green LSi ~95K (03/96) #872 1997 Bordeaux Pearl LSi ~55K (08/96) #097 2003 Brilliant Red LS1 Convertible ~29K (04/03) #8951 1999 Magnetic Red LS1 Coupe ~33K (04/99) #6420 My Email | Old Locker | New Locker | Picture of 15 of the 19 |
#5
|
||||
|
||||
Yeah I checked on there but my power sterring hose is diffrent from the one that they show, Its not as long, it comes from the sterring rack in the same place but only goes up to the top then stops about 1 inch later. Then it reconects to a hard pipe that follows the same route as the one in the diagram. Iam going to check part numbers tomaro, hopefully the diagram is wrong.
|
#6
|
||||
|
||||
I was able to get a hose made for my car but it does involve a bit of welding and the original ends. The hose also has a larger inner diameter than stock for better flow.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
Thread Tools | |
Display Modes | |
|
|