SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
impreza tranny
what all do i have to pull from a impreza to make the trans work will it bolt right to my engine
|
#2
|
||||
|
||||
You have only the transmission to pull from the Impreza.....
You have to use the svx tcu. You can not use an Impreza rear end, unless it is a five bolt side plate rear end. You HAVE to use a torque converter from the svx, or from an Legacy Outback with a 2.5 engine. You have to re-use the speed sensor from the svx. You have to use either a 4.11(matching the trans ratio) limited slip or use the Legacy housing with the svx limited slip carrier, mounted in the Legacy five bolt side plate rear end.
__________________
www.svxfiles.com The first SuperCharged SVX, the first 4.44 gears, the first equal length headers, the first phenolic spacers, the first Class Glass fiberglass hood, the first with 4, 4.44s in his driveway Fiberglass Hood thread My locker 4.44 Swap link |
#3
|
|||
|
|||
What svxfiles said ^^^^
I had to use the input shaft from the SVX in a 98 model Imprezza transmission as the end of the Imprezza shaft stuck out further than the SVX shaft & wouldn't allow the torque converter to fully seat - it's an easy swap, slide one out, slip the other in. |
Thread Tools | |
Display Modes | |
|
|