Rear Deck Blower

[SURTEESS]

as "Ewie" was interested in the fact that my SVX had a "blower" attached - these photos I sent to Zavikan about 3 month ago to do a write-up ......

Cover

Cover with indicator showing

Indicator

Inside cover - showing copper coating - RF & EMC shielding in order that High Voltage transformer (ioniser) will not affect the antenna pickup for radio. Indicator is just below screw QC type connector & the little piece of plastic is the HV disable plunger.

Metal plates - these are the high volts parts (2Kv +) - replace lamp with LED, also notice micro switch that fits in with previous photo - disable HV when cover is off. Charcoal filter is just behind the plates & also a fan behind that.