SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#1
|
|||
|
|||
Door Panel won't come off...
Taken out the 5 screws and already put some good sized cracks in things trying to pull up and pull it out as noted on the previous threads.(also, I have all the clips pulled free at the bottom)
It's wiggling around but it will NOT come off for nothing. Can anyone please further explain this process because the previous threads must be missing some step? Problem solved: There's 3 screws under the arm rest felt as opposed to just two like the how-tos would have you believe. Last edited by Mephis; 08-06-2009 at 01:29 AM. |
#2
|
|||
|
|||
Re: Door Panel won't come off...
It acts like it's hung up some where between where the front screw in the armrest goes, and the door handle.
I'm still yanking around and trying to figure out what on earth is going on.... |
#3
|
||||
|
||||
Re: Door Panel won't come off...
You did remove the screw under the handle right?
__________________
Seth 94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats Soon to come:Fiberglass hood, upholster ALL suede to black leather Past subies: 92' Pearl White/black top LS-L-SOLD 96' Legacy Outback-TOTALED 99' Legacy Outback Limited 30th anniversary edition-TOTALED 98' Forester L -Totaled Other toys: 99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap 06' B9 Tribeca-Stock 1982' Yamaha xj650 Maxim Mods: work in progress |
#4
|
|||
|
|||
Re: Door Panel won't come off...
Yep... The goldish colored one.
It's moving freely-ish. It's just sort of rotating at the point I mentioned and refuses to break free. All along the edges is free, top and bottom is free, I have the lock down inside the door, and I can rotate it over the door handle but I can't get it to pull off. Anyone have any ideas? I'm having to do this over at a friend's house where I have some room and I'm just refreshing the page in hopes someone knows of something to try. Last edited by Mephis; 08-05-2009 at 05:40 PM. |
#5
|
||||
|
||||
Re: Door Panel won't come off...
There are some plugs you have to disconnect for the locks and light.
__________________
Seth 94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats Soon to come:Fiberglass hood, upholster ALL suede to black leather Past subies: 92' Pearl White/black top LS-L-SOLD 96' Legacy Outback-TOTALED 99' Legacy Outback Limited 30th anniversary edition-TOTALED 98' Forester L -Totaled Other toys: 99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap 06' B9 Tribeca-Stock 1982' Yamaha xj650 Maxim Mods: work in progress |
#6
|
|||
|
|||
Re: Door Panel won't come off...
There's 6 screws... Not 5.
I just pulled the arm rest support clean out of the metal frame of the door. You guys need to fix your write ups. |
#7
|
||||
|
||||
Re: Door Panel won't come off...
Theres 5 securing the door panel to the door..... I think the 6th screw you're referring to is the one forward of the 2 big ones down in the armrest. It only secures the little plastic piece inside and is not necessary to remove to get the panel off.
|
#8
|
||||
|
||||
Re: Door Panel won't come off...
Quote:
|
|
|