The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > General SVX Babble

Reply
 
Thread Tools Display Modes
  #1  
Old 11-20-2008, 04:21 PM
tiv0's Avatar
tiv0 tiv0 is offline
svxless
 
Join Date: Oct 2007
Location: Omaha, NE
Posts: 629
Registered SVX
trunk board

can anyone give me the dimensions on the trunk board (wood piece under the carpet in the trunk) please?

mine is horribly warped/torn/beat and im cutting out a new one
__________________
Trevor
Avondale, AZ

1992 LS-L Liquid Silver 126k "BXR6" Sold 3/23/13
1992 LS-L Claret 178k totaled 10/26/09

1987 BMW 325is

60% of the time it works, every time
Reply With Quote
  #2  
Old 11-20-2008, 04:27 PM
redlightningsvx's Avatar
redlightningsvx redlightningsvx is offline
Collision Refinishing Tech
 
Join Date: Aug 2007
Location: Huntingdon, PA
Posts: 2,279
Registered SVX
Re: trunk board

Just take it out and trace it on a huge sheet of paper.
__________________
Seth
94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold
Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats
Soon to come:Fiberglass hood, upholster ALL suede to black leather
Past subies:

92' Pearl White/black top LS-L-SOLD
96' Legacy Outback-TOTALED
99' Legacy Outback Limited 30th anniversary edition-TOTALED
98' Forester L -Totaled
Other toys:
99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap
06' B9 Tribeca-Stock
1982' Yamaha xj650 Maxim
Mods:
work in progress
Reply With Quote
  #3  
Old 11-20-2008, 04:31 PM
tiv0's Avatar
tiv0 tiv0 is offline
svxless
 
Join Date: Oct 2007
Location: Omaha, NE
Posts: 629
Registered SVX
Re: trunk board

well i would, but its not exactly traceable

moisture and applied weight have effected it too much

i plan on doing that as a last resort, jw if anyone had the dimensions handy
__________________
Trevor
Avondale, AZ

1992 LS-L Liquid Silver 126k "BXR6" Sold 3/23/13
1992 LS-L Claret 178k totaled 10/26/09

1987 BMW 325is

60% of the time it works, every time
Reply With Quote
  #4  
Old 11-20-2008, 05:03 PM
redlightningsvx's Avatar
redlightningsvx redlightningsvx is offline
Collision Refinishing Tech
 
Join Date: Aug 2007
Location: Huntingdon, PA
Posts: 2,279
Registered SVX
Re: trunk board

I know what you mean. Mine is the same way and it's on my to-do list.
__________________
Seth
94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold
Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats
Soon to come:Fiberglass hood, upholster ALL suede to black leather
Past subies:

92' Pearl White/black top LS-L-SOLD
96' Legacy Outback-TOTALED
99' Legacy Outback Limited 30th anniversary edition-TOTALED
98' Forester L -Totaled
Other toys:
99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap
06' B9 Tribeca-Stock
1982' Yamaha xj650 Maxim
Mods:
work in progress
Reply With Quote
  #5  
Old 11-20-2008, 06:57 PM
svxcess's Avatar
svxcess svxcess is offline
Super Moderator
Alcyone Gold Contributor
 
Join Date: Feb 2001
Location: Westminster, MD
Posts: 6,747
Significant Technical Input Registered SVX Classic SVX
Re: trunk board

Get a half sheet (4' x 4') of 1/4" 0r 5/16" Luan plywood from Lowes or Home Depot. This is a very fine dense grain without knots

Remove the plastic pieces at the bottom edge of the board by drilling through the rivets.

Lay your old trunk board on top of it and weight it down with a few bricks of pieces of cinder block to flatten it. Orient the plywood so the grain runs in the shortest direction (front to rear)

Trace around it and use a jig saw (either table or handheld sabre saw) Also cut out the hand holes and mark where the holes will be drilled to reattach the plastic clips. Drill the holes.

An easy way to cut perfect hand holes is to trace the rough outline. Use a hole saw to cut out the round ends of each hand hole and connect the two with a straight line)

Sand around all exposed edges to smooth the cuts.

Get some Thompson's Water Seal ans apply even coats to each side and the edges. I alternated coating both sides until I had 4 coats on each side. This stuff dries very quickly and adds firmness as well.

Reattach the two black plastic clips to the bottom edge, using large pop rivets and you are done.

I did this about 5 years ago when I first bought my polo and it has remained very sturdy and has not warped. The Water Seal keeps moisture and humidity from being absorbed.

If you want to make it EXTREMELY sturdy, cut a piece is 1" aluminum box channel and run it the width of the trunk board underneath (width of the tire well). Attach it from the top using long flat-head machine screws. They should be long enough to go through the board and through the box channel so that nuts can be attached from the bottom and the whole thing tightened down.

.
__________________
.
Subaru Ambassador

1996 Polo Green LSi #216..138,100 miles...SOLD

JFICX8659TH100216.....Date of Manufacture: November 16, 1995.....
Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan

In-Service Date: January 2, 1997



"The Pristine Green Polo Machine”
First Polo Green on the Network
First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000)
First 5000K HID factory fog lights (2007)
First SVX JDM BBS wheels on a USDM SVX (2013)

HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler.


R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016

2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback

2007 Mazda Miata MX-5 PRHT...102,000 miles.
Plenty of parts, service and windshields.


4th Registered Network member —2/21/2001

My NEW locker..I...My Email..I..Wikipedia/SVX .

.

Last edited by svxcess; 11-20-2008 at 06:59 PM.
Reply With Quote
  #6  
Old 11-20-2008, 08:00 PM
Hondasucks's Avatar
Hondasucks Hondasucks is offline
Subaru Technician
 
Join Date: Aug 2007
Location: Vancouver, WA
Posts: 1,512
Send a message via AIM to Hondasucks Send a message via MSN to Hondasucks Send a message via Yahoo to Hondasucks
Registered SVX
Re: trunk board

You could also try using a wet (More than damp, but not dripping wet) towel and an iron to soften the wood in order to flatten it out, and then trace it. I will have to try the above with mine, it's not warped but I would definitely like something more sturdy back there.
__________________
1992 SVX LS-L #1222 Pearl White
1987 GL Turbo wagon, 5 lug conversion, D/R 5 speed (Rice killer)
1992 Dodge Ram 4x4 diesel (car hauler)
1968 Dodge Polara convertible (Camaro killer)
1990 Toyota Corolla FWD auto (330,000 mile grocery getter)
1986 VW Jetta
Reply With Quote
  #7  
Old 11-20-2008, 08:07 PM
Hocrest's Avatar
Hocrest Hocrest is offline
Freezepop's are Awesome!!!!
Subaru Silver Contributor
 
Join Date: Oct 2003
Location: Pittston, PA
Posts: 5,334
Send a message via AIM to Hocrest
Re: trunk board

Hose it down, get it very wet, then lay it out flat and stack things on it to keep it flat while it dries for a few days.

If it's not sturdy enough after that, at least it will be flat for tracing.
__________________
Dave
- 03 Baja - 92 SVX - 86 Brat - 08 OB 3.0
Reply With Quote
  #8  
Old 11-20-2008, 08:33 PM
tiv0's Avatar
tiv0 tiv0 is offline
svxless
 
Join Date: Oct 2007
Location: Omaha, NE
Posts: 629
Registered SVX
Re: trunk board

thank you for your suggestions


the board in my trunk has been pretty bad but ive never really had any issues with it until recently
a few days ago i put my bass amp in the trunk and had it in there for about 3 days
when i opened the trunk i found that the board had warped all the way down to the spare tire
__________________
Trevor
Avondale, AZ

1992 LS-L Liquid Silver 126k "BXR6" Sold 3/23/13
1992 LS-L Claret 178k totaled 10/26/09

1987 BMW 325is

60% of the time it works, every time
Reply With Quote
  #9  
Old 11-21-2008, 01:58 PM
dennyo dennyo is offline
Registered User
 
Join Date: Sep 2007
Location: ny the vampire state
Posts: 248
Registered SVX
Re: trunk board

maybe if there is someone around your area they could let you use theirs for a pattern. Or they could send you a pattern.Just a thought.
Reply With Quote
  #10  
Old 11-21-2008, 03:21 PM
michael's Avatar
michael michael is offline
What Potholes ???
Subaru Bronze Contributor
 
Join Date: Sep 2002
Location: Scranton, PA
Posts: 2,425
Registered SVX
Re: trunk board

I used a 1/4 thick sheet of PVC. Looks factory and will not warp. You can find it at a sign shop.
Reply With Quote
  #11  
Old 11-24-2008, 08:05 PM
Johnybeas Johnybeas is offline
Banned
 
Join Date: Aug 2005
Location: Sandy,UT/ Daytona Beach, FL
Posts: 1,712
Send a message via AIM to Johnybeas Send a message via MSN to Johnybeas Send a message via Yahoo to Johnybeas Send a message via Skype™ to Johnybeas
Registered SVX
Re: trunk board

my dad redid mine last fall for me just got some particle board just like the stock and took him maybe half an hour looks amazing and fits perfectly.

He just traced the old one I had duck taped to keep it together for a year or so, till it was so bad we just made a new one. It's awesome! Didn't coat it but that is a good idea, I think I'll do that when I get home.
Reply With Quote
  #12  
Old 12-07-2008, 10:58 PM
tiv0's Avatar
tiv0 tiv0 is offline
svxless
 
Join Date: Oct 2007
Location: Omaha, NE
Posts: 629
Registered SVX
Re: trunk board

im terribly sorry for the sub-par phone pic
but i finished the board yesterday
i wanted a board that would fit the entire trunk, so i traced the carpet instead of the old (untraceable) board
i then sealed it with a waterproof finish

__________________
Trevor
Avondale, AZ

1992 LS-L Liquid Silver 126k "BXR6" Sold 3/23/13
1992 LS-L Claret 178k totaled 10/26/09

1987 BMW 325is

60% of the time it works, every time
Reply With Quote
  #13  
Old 12-07-2008, 10:58 PM
tiv0's Avatar
tiv0 tiv0 is offline
svxless
 
Join Date: Oct 2007
Location: Omaha, NE
Posts: 629
Registered SVX
Re: trunk board

will take more, better, pics later
__________________
Trevor
Avondale, AZ

1992 LS-L Liquid Silver 126k "BXR6" Sold 3/23/13
1992 LS-L Claret 178k totaled 10/26/09

1987 BMW 325is

60% of the time it works, every time
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:33 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122