SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
5 Speed Neutral Selecting Switch
Hi
I wanted to find out peoples thoughts and for other people considering doing a conversion, that instead of connecting the neutral selecting circuit to the clutch pedal as everyone else has done connecting it straight to the gearbox The 91 JDM Legacy RS gearbox i used has a circuit that completes when the car is in gear, so i installed a relay and connected the appropriate wires so the car thinks its in drive when it is in gear and in neutral when in neutral. So far no problems with stalling or any other effects, haven't driven it much tho. Thought this is easier than adding switch to clutch pedal. |
#2
|
||||
|
||||
I plan to do the same thing with my 6 speed, It will serve the same purpous and I like to be able to just reach in and start it up.
__________________
92 SVX #772 140k 6speed, ECU Tune stage II, Koni/Ground control, 3,270lbs. 91 Legacy Turbo 5spd. FMIC, crappy stock turbo, ACT clutch. 78 BRAT (New toy) (Soon to be EJ22T powered) 90 240 SX. RB25 powered!! DRIFT!!!111!!! (GF's car) To many cars to spend time on teh web! |
#3
|
||||
|
||||
I use that switch for the cruise control. If someone knocks it out of gear my cruice kicks off.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
Thread Tools | |
Display Modes | |
|
|