The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > General SVX Babble

Reply
 
Thread Tools Display Modes
  #1  
Old 07-27-2007, 10:14 PM
svxpert svxpert is offline
Registered User
 
Join Date: May 2001
Posts: 660
going to need some parts fabricated

I'll be needing the following parts for a custom SVX build i'll be doing soon. If anyone can make these parts, post here or PM me. 'm looking for good
workmanship at a resonable price. I can supply most of the parts, just need them fabricated.

1. 6 speed tranny cradle/mount
2. turbo engine crossmember cut for a up-pipe
3. rear crossmember for a R180 (STi rear)
4. 6 speed shifter that fits the SVX
5. hydro operated clutch set up with a DBW gas pedal
6. hood with a scoop?

thanks
Reply With Quote
  #2  
Old 07-27-2007, 10:22 PM
SVXRide's Avatar
SVXRide SVXRide is offline
Official AutoX Part Breaker
Subaru Gold Contributor
 
Join Date: Aug 2002
Location: Midlothian, VA 23112
Posts: 8,138
Registered SVX
Quote:
Originally Posted by svxpert
I'll be needing the following parts for a custom SVX build i'll be doing soon. If anyone can make these parts, post here or PM me. 'm looking for good
workmanship at a resonable price. I can supply most of the parts, just need them fabricated.

1. 6 speed tranny cradle/mount
2. turbo engine crossmember cut for a up-pipe
3. rear crossmember for a R180 (STi rear)
4. 6 speed shifter that fits the SVX
5. hydro operated clutch set up with a DBW gas pedal
6. hood with a scoop?

thanks
Let's see, TOMSSVX should be able to provide #1, #4, and #5. I believe Dayle carries #6. PhastSVX should be able to help on #2, and I believe the stock rear crossmember works with the R180 rear (I think everyone running a 6spd right now is using a R180 rear).

-Bill
__________________
Retired NASA Rocket Scientist

Most famous NASA "Child" - OSIRIS-REx delivered samples from asteroid BENNU to Earth in Sept. 2023

Center Network Member #989

'92 Fully caged, 5 speed, waiting for its fully built EG33
'92 "Test Mule", 4:44 Auto, JDM 4:44 Rear Diff with Mech LSD, Tuned headers, Full one-off suspension
'92(?) Laguna, 6 spd and other stuff (still at OT's place)
My Locker
Reply With Quote
  #3  
Old 07-27-2007, 10:54 PM
TomsSVX's Avatar
TomsSVX TomsSVX is offline
Maniac modifier
 
Join Date: Dec 2003
Location: Branchburg, New Jersey
Posts: 15,489
Registered SVX Classic SVX
Quote:
Originally Posted by svxpert
I'll be needing the following parts for a custom SVX build i'll be doing soon. If anyone can make these parts, post here or PM me. 'm looking for good
workmanship at a resonable price. I can supply most of the parts, just need them fabricated.

1. 6 speed tranny cradle/mount
2. turbo engine crossmember cut for a up-pipe
3. rear crossmember for a R180 (STi rear)
4. 6 speed shifter that fits the SVX
5. hydro operated clutch set up with a DBW gas pedal
6. hood with a scoop?

thanks
1. 6 speed tranny cradle/mount- got one sitting in the garage as we speak
2. turbo engine crossmember cut for a up-pipe- I have a full subframe... Just need to know where you need it cut and welded
3. rear crossmember for a R180 (STi rear)- You can notch the underbelly strap for the rear or leave it out like I did
4. 6 speed shifter that fits the SVX- I can make one in the next couple days
5. hydro operated clutch set up with a DBW gas pedal- I think I have a DBW gas pedal actually but not sure if it has the pedal cover. I can also make you a set of hydro pedals that fit the SVX to a T using the SVX frame and WRX guts... You even get to keep the SVX brake booster... Let me know if you want me to get to work. It's $800 for the 6mt conversion kit... which is what you need

Tom
6. hood with a scoop?
Reply With Quote
  #4  
Old 07-27-2007, 11:13 PM
svxpert svxpert is offline
Registered User
 
Join Date: May 2001
Posts: 660
1. 6 speed tranny cradle/mount- got one sitting in the garage as we speak
i'll let you know when i need it.

2. turbo engine crossmember cut for a up-pipe- I have a full subframe... Just need to know where you need it cut and welded
i'll have to get some measurements for you. i'll have one for you for a core.

3. rear crossmember for a R180 (STi rear)- You can notch the underbelly strap for the rear or leave it out like I did
ok, i guess i can do that

4. 6 speed shifter that fits the SVX- I can make one in the next couple days
i have a new one you can use to make one.

5. hydro operated clutch set up with a DBW gas pedal- I think I have a DBW gas pedal actually but not sure if it has the pedal cover. I can also make you a set of hydro pedals that fit the SVX to a T using the SVX frame and WRX guts... You even get to keep the SVX brake booster
i have a new DBW pedal and a set of WRX pedals along with the hydo slave cylider. when i get the stock SVX pedals i can give them to you for a core.

sounds good. pm me a price for everything as i will supply parts and give you cores. thanks
Reply With Quote
  #5  
Old 07-27-2007, 11:22 PM
TomsSVX's Avatar
TomsSVX TomsSVX is offline
Maniac modifier
 
Join Date: Dec 2003
Location: Branchburg, New Jersey
Posts: 15,489
Registered SVX Classic SVX
cores are good for $100 off. Depending on how much time I log on the Subramfe will determine how much it will cost.... I gotta see if we can put the DBW ass. on the SVX pedal... will let u know

Tom
Reply With Quote
  #6  
Old 07-29-2007, 08:15 PM
svxpert svxpert is offline
Registered User
 
Join Date: May 2001
Posts: 660
<<I believe Dayle carries #6>>

i looked on his site and they only have the scoops that you bolt on. does anyone make a one piece hood with the scoope built in? thanks
Reply With Quote
  #7  
Old 07-30-2007, 02:27 AM
AlcyoneDaze's Avatar
AlcyoneDaze AlcyoneDaze is offline
<-- custom hood ornament
 
Join Date: Nov 2006
Location: NJ
Posts: 689
Send a message via AIM to AlcyoneDaze Send a message via Yahoo to AlcyoneDaze
ummm... on Dayle's website they have a fiberglass hood with a All-Trac/Impreza style functional scoop. The hood probably weighs a good deal less. Look a little harder in the 'Exterior' section
__________________
1992 Pearl White/Black Onyx Subaru Alcyone SVX LS-L
Donating Forum Member In Good Standing
JDM 4.11 Geared Transmission
JDM 'ALCYONE' Rear Panel
JDM 'BOXER' Eingngine Cover
JDM 'SVX' Hood Badge
L-Edition Suede Rear Seats
Reply With Quote
  #8  
Old 07-30-2007, 02:44 PM
svxpert svxpert is offline
Registered User
 
Join Date: May 2001
Posts: 660
hood

thanks, found it after putting "hood" into the search on his site. do you have that fiberglass hood on your SVX?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:32 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122