The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Technical Q & A

Reply
 
Thread Tools Display Modes
  #1  
Old 03-22-2007, 12:57 PM
benebob's Avatar
benebob benebob is offline
Have a poncho I can borrow?
 
Join Date: May 2001
Location: Lancaster, PA
Posts: 6,561
Getting a Production class. Specs needed

The 6 page submital tech specs required that I haven't found yet. Need back up evidence (i.e. shop manuals or whatever to prove).

Wet Curb weight:
Rear window slope angle
Windshield slope angle
Rev limit miethod
Block deck height (min)
Deck clearance (min
Total Combustion chamber volume
Valve head dia (max
Valve material
Connceting rod length (center to center)
Connecting rod material:
Connceting rod mass:
Piston, pin rod and ring(s) mass (min):
Crankshaft mass
Lift @ lob (max)
Lift @ valve (max)
Rocker arm ratio
Tappet Type
Throttle body bore diameter:
Spring material dia/thikness
Overall spring dia/Width


Any help would be greatly appriciated.
__________________
British vehicles are my last ditch attempt to keep the nasty Italian thoughts in my mind at bay. So far its working.
Reply With Quote
  #2  
Old 03-22-2007, 01:37 PM
SVXRide's Avatar
SVXRide SVXRide is offline
Official AutoX Part Breaker
Subaru Gold Contributor
 
Join Date: Aug 2002
Location: Midlothian, VA 23112
Posts: 8,138
Registered SVX
Quote:
Originally Posted by benebob
The 6 page submital tech specs required that I haven't found yet. Need back up evidence (i.e. shop manuals or whatever to prove).

Wet Curb weight:
Rear window slope angle
Windshield slope angle
Rev limit miethod electronic - spark cut out (?)
Block deck height (min)
Deck clearance (min I believe it's actually negative, as the piston extends above the deck at TDC
Total Combustion chamber volume
Valve head dia (max Intake=36mm, Exhaust=32mm
Valve material
Connceting rod length (center to center)
Connecting rod material:
Connceting rod mass: 620 g
Piston, pin rod and ring(s) mass (min):
Crankshaft mass
Lift @ lob (max) 7mm intake, 8mm exhaust
Lift @ valve (max) 7mm intake, 8mm exhaust
Rocker arm ratio n/a
Tappet Type hydraulic
Throttle body bore diameter: 63mm each
Spring material dia/thikness
Overall spring dia/Width


Any help would be greatly appriciated.
Ben,
Hope this helps. I've got some of the other figures, just not at work
-Bill
__________________
Retired NASA Rocket Scientist

Most famous NASA "Child" - OSIRIS-REx delivered samples from asteroid BENNU to Earth in Sept. 2023

Center Network Member #989

'92 Fully caged, 5 speed, waiting for its fully built EG33
'92 "Test Mule", 4:44 Auto, JDM 4:44 Rear Diff with Mech LSD, Tuned headers, Full one-off suspension
'92(?) Laguna, 6 spd and other stuff (still at OT's place)
My Locker
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:37 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122