SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Confirm Tran mount part #41022PA070
I have a bad tran mount (at the rear of the tranny) and from reading through the posts it looks like the part # is 41022PA070. Again, it is at the back of the tranny and it looks like I have to move the exhaust to get to it. Thanks for the help!
__________________
Paul 1992 LSl (Black Mica) 1965 Mustang G.T. Fastback 1990 Mustang G.T. Convertible 1986 1/2 Nissan 4x4 2004 Vovlo XC70 (wife's) Wonderful Wife Wonderful Son 2 Cats Incredibly blessed! |
#2
|
||||
|
||||
That's the 2WD mount. If you have AWD then it's 41022PA081.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
#3
|
||||
|
||||
You should NOT have to drop the exhaust to change it.
If you safely support the tranny by the pan, (using of course a flat wooden board to protect the trans pan) remove the rear trans mount (6 bolts) and the four bolts from the mount to the trans, and the three holding the mount to the crossmember, it should wiggle out. Good luck.
__________________
www.svxfiles.com The first SuperCharged SVX, the first 4.44 gears, the first equal length headers, the first phenolic spacers, the first Class Glass fiberglass hood, the first with 4, 4.44s in his driveway Fiberglass Hood thread My locker 4.44 Swap link |
#4
|
||||
|
||||
Thanks!
Thanks! Now that I have my window fixed I plan on tackling other areas of the car.
|
Thread Tools | |
Display Modes | |
|
|