6 pot mono block Brembo calliper kit

['E']

This is a pic of a 6 pot and 2 pot kit

['E']

And this is the pic of what the 6pot and 4 pot kits looks like

['E']

This is the kit fitted to a 2001 twin turbo liberty

['E']

From a different angle

['E']

One more pic

['E']

kit is still cost price for members at AUD$2,500

[Crazy_pilot]

I really wish I could pick this up... Unfortunately between the 6MT, body panels, and a new car I've tapped out my toy budget for quite a while.

['E']

Originally Posted by Crazy_pilot

I really wish I could pick this up... Unfortunately between the 6MT, body panels, and a new car I've tapped out my toy budget for quite a while.

im not going anywhere they'll be here waiting for you when you are ready

[Tireiron]

As far as fitment under wheels, how much larger are these compared to STi Brembos? I know I'm stuck with 18s for either brake option, but do these require less of an offset or a deeper dished wheel than the STi brembos? (would personally like this setup more even for just the "in your face" factor of the calipers) I need to look into something better to slow me down after a hard pull on a windy road heh.

['E']

Originally Posted by Tireiron

As far as fitment under wheels, how much larger are these compared to STi Brembos? I know I'm stuck with 18s for either brake option, but do these require less of an offset or a deeper dished wheel than the STi brembos? (would personally like this setup more even for just the "in your face" factor of the calipers) I need to look into something better to slow me down after a hard pull on a windy road heh.

They will suit a 18x8.5 with +42 offset (and maybe a +38 aswell, need to check that) and are about the same size as the sti brembos they just use a bigger arc.

Darin

[Tireiron]

Good to know, I'm gonna do my coilovers and brakes in the spring when I build some money back up and will hopefully be using a high offset (possibly a +63, with a 10mm spacer if absolutely needed) and some 265 tires to keep everything tucked inside the fenders. Ill have to do my brakes then test fit some of my friends STi and aftermarket rims to see eactly how much clearance I have. Good to know the radials are the same width as the standard brembos, I always thought the standard brembos were oversized for just a 4 pot caliper.

Is the 2 pot rear setup the same as the STi brembo 2 pot rear calipers? If so then I have an easy source for them to match things up.

['E']

Originally Posted by Tireiron

Is the 2 pot rear setup the same as the STi brembo 2 pot rear calipers? If so then I have an easy source for them to match things up.

yes sti brembo 2 pot rears and you'll need sti backing plate, see thread below

http://www.subaru-svx.net/forum/showthread.php?t=57288

Darin

[Tireiron]

Yea, I know how the STi 2 pots install, I just wasn't sure if the OEM 6 pot brembo kit used larger rear 2 pots or not.

['E']

Originally Posted by Tireiron

Yea, I know how the STi 2 pots install, I just wasn't sure if the OEM 6 pot brembo kit used larger rear 2 pots or not.

No same 2 pots

[SVXRide]

Here's another vote for a kit that fits 17" rims. Rationale here is that I've already got 9.5 inch wide 17" rims with Hoosier A6 295 tires mounted on them

Great job!

Bill