i think i did something stupid.. mystery harnesses?

kuroneko_sama · #1 10-14-2006, 09:57 PM

i have a 97 lsi

well i was in the fuse box (under the dash) and i noticed some harnesses that didnt connect to anything, i noticed two looked liked they belonged togehter so i plugged em together to see what would happen.. well when i started the car, my check engine light started BLINKING.... yes blinking... instead of jsut coming on for a few min and going off or something liek that it simply was blinking pretty rapidly and consistantly at regular intravals....

so i decided to unplug that harness ASAP... butthe light is still blinking.....

so i have now 3 questions

WTF are those harnesses for? and where do they lead? (the more specific the knowledge the more ill be able to sleep at night)

and what is now wrong with my car?

ill take a pic of the issue and circle the harness i connected

kuroneko_sama · #2 10-14-2006, 10:19 PM

ok here is the culprit... any info?????

02010 001.jpg

Hocrest · #3 10-15-2006, 11:18 AM

What code does it give?

Suby Fan · #4 10-15-2006, 01:36 PM

is sounds like you pluged in some older diainostic equipment... this 95 subaru i worked on had half the hook ups for the check engine light blink system one for the subaru slect monitor and one for obd II your prob. going to need to clear what ever code you triped in the OBD II system

Archer999 · #5 10-15-2006, 02:28 PM

You may try and take off your ground on your battery, let it sit there for awhile and then hook it back up.

Allways looking for a cheap solution.

kuroneko_sama · #6 10-18-2006, 09:12 PM

well i unhooked the ground for a day... still blinking light... so i took the battery out of the car for another day.... when i put it back in...still blinking "check engine light" i had to use it to get to work... it drove fine, butthe blinking check ingine light is a concern.... anyone have any idea what those harnesses are???? anyone got like a book or something with schematics?

kuroneko_sama · #7 10-19-2006, 07:36 AM

well i had the codes read at my gf's dad's girage.. .and no codes were coming through.... apparently the code machine doesnt realise i have a check engine light blinking...... any thoughts when it was set to clear the codes it didnt change anything.....

so now to recap....

i have a blinking check engine light

the car is not giving off any codes

clearing the codes does not stop the blinking

disconnecting the battery does not stop the blinking

SOMEbody has had to have had this problem... i cant believe im the only one.

mikecg · #8 10-19-2006, 07:55 AM

Well one thing to check is fuses. Hooking up things that arent supoose to be can blow fuses pretty quickly. You could have blow a fuse to something that isnt all that important or not regularly used. It's unlikely that something like that would be unnoticed but it is possible and doesnt take long to check and it's free.

huck369 · #9 10-19-2006, 08:05 AM

Are you sure you unhooked the correct connectors?....

dcarrb · #10 10-19-2006, 09:10 AM

Quote:

Originally Posted by kuroneko_sama

SOMEbody has had to have had this problem... i cant believe im the only one.

I don't know, man. You may be.

When I was little, being an inquisitive sort, I took a length of wire I'd found in my grandparents' barn and stuck it into a lamp socket.

Never did that again.

Sorry, kuroneko_sama, just messin' with you. Good luck sorting out the trouble.

dcb

Crysis · #11 10-19-2006, 10:28 AM

I connected the same 2 plugs together that you did and I didnt have any problems. :/

Earthworm · #12 10-19-2006, 11:06 AM

Does the car run?

kuroneko_sama · #13 10-20-2006, 12:21 AM

it runs fine as if there is nothing wrong

except the check engine light thingy....

what does that harness do if it worked fine on you

should it be plugged in???

im driving my van in the meantime not sure i should do too much till i at least know what happened...its hard to feel cool driving a minivan though

kuroneko_sama · #14 10-20-2006, 12:31 AM

Quote:

Originally Posted by huck369

Are you sure you unhooked the correct connectors?....

there are only 2 that fit.... the other is the electric that do like the interior lights, power lock, and the key beepy thingy when you leave it in the ignition withthe door open....

the other was the ones i plugged in and got all blinky

so i unplugged it right away

if when he plugged them in and had no result.... should it be plugged in?? .. i only did it cause i thought maybe it became unplugged sometime and shoulda been in in the first place... stupid subaru...why have harnesses to nowhere, its liek a non working browning knob on a toaster

sharky512345 · #15 10-20-2006, 12:31 AM

that sounds like my Check Engine Light. it tunrns on and off about every other day. but this is unrelated and i need to replace my O2 sensors sometime soon

but it isn't dead yet because my gas mileage is as good as ever still

Anyway, hope you figure this out