Radio Solution

[Lucaru]

My current goal is to remove the stock radio and replace it with a 1din deck.
Underneath that I will have a 3 gauge setup, seen a few pics online and think it would be nicer than destroying my useless ashtray

I've searched online for adapters to the stock wiring but of course no results.
Does anyone have any viable solution for this or should I just cut the wires and pray I don't mess up?

[Blacky]

This guy is a member of the forum. He has many different wiring adapters. I bought one years ago.
http://ae64.com/Products.htm

[TomsSVX]

Just make sure you get the right size gauges. Std size gauges will be too big for a single din

Tom

[Lucaru]

Thanks for the help, I've emailed the gentleman asking if he still takes orders and no answer yet.


Also Tom thanks for the info! I ordered a 1 din gauge holder which claims to fit 52mm gauges ill see what I'm dealing with when it arrives in 3 weeks time

[svxnavyvet]

I sent a message about 3 weeks ago no reply yet

Originally Posted by Lucaru

Thanks for the help, I've emailed the gentleman asking if he still takes orders and no answer yet.


Also Tom thanks for the info! I ordered a 1 din gauge holder which claims to fit 52mm gauges ill see what I'm dealing with when it arrives in 3 weeks time

[SVXdc]

Hi, I'm still alive. I've had a bunch of things going on the last couple of years (including an elderly parent with health issues). I'll still be tied up for the next ~ month, but will slowly get back to supplying wiring harnesses.

[svxnavyvet]

Glad your ok I can't get ahold of mike (LAN) either I would like to get 2 of the svx to new adaptors
http://ae64.com/images-e41/SVX_fwd_t...nt-harness.jpg
Thanks
Jim

Originally Posted by SVXdc

Hi, I'm still alive. I've had a bunch of things going on the last couple of years (including an elderly parent with health issues). I'll still be tied up for the next ~ month, but will slowly get back to supplying wiring harnesses.

[wdb]

Originally Posted by SVXdc

Hi, I'm still alive. I've had a bunch of things going on the last couple of years (including an elderly parent with health issues). I'll still be tied up for the next ~ month, but will slowly get back to supplying wiring harnesses.

BTDT. It can suck every free moment out of your life, but it is a tremendous act of love.

Thanks for replying, best wishes for your parent.