92 ecu inputs/outputs

Does anyone here have a factory service manual for the 1992? I was looking for the page that labels what all of the wires that go into and out of the ecu are for. I know there's a bunch, but I have think it would probably be all on 1 or 2 pages in a schematic. If you do have one, would you be able to scan the picture into this thread?

Thanks

[huck369]

Had my Chilton's manual open to this very page when I read your post, here is a copy

Thanks!

[oab_au]

Huck369
Thanks for posting the ECU dia. This info is hard to find here in Aust. and explains a lot eg.3, O2 sensors, and the boost sensor on the throttle position sensor, that would be the unit that decides if you have moved the throttle fast enough to cause power mode to be used. Very interesting.
I don't suppose your Chiltons would happen to be open at the TCU input /output diag. by any chance, I would really like to have a look at that one.

Thanks again
Harvey.

[nvrmore100]

Originally posted by ehyde111
Thanks!

Uh oh now you got me worried.

First I send you a modded ECU....now your asking for wiring diagrams.

I think we have a performance freak on our hands.

Ryan

[huck369]

Originally posted by oab_au
Huck369
I don't suppose your Chiltons would happen to be open at the TCU input /output diag. by any chance, I would really like to have a look at that one.

Thanks again
Harvey.

Harvey,
The Chilton's doesn't have the the TCU diagram, it doesn't have much of anyting on the tranny's other than removal and replacment of the tranny, nothing electrical about it.

I think Randy has the factory service manual, which should have it in it, how about it Randy, could you post the TCU diagram? I could use it myself right now, to decipher which wires to jump on the nuetral safty switch to make my 5-Speed conversion start without the Nuetral Saftey Switch laying under the hood.

Thanks,

Originally posted by nvrmore100


Uh oh now you got me worried.

. . .

I think we have a performance freak on our hands.

Ryan

Not actually a performance freak, just a control freak. I'm actually looking into the rev/speed limiter. I've seen some conflicting data and remember this was the place to start from my previous car.

I despise the computer telling me how fast I can go. I can deal with aerodynamics and laws of physics, but no, not the ECU.

Sorry to disappoint.

[Aredubjay]

Originally posted by huck369


Harvey,
The Chilton's doesn't have the the TCU diagram, it doesn't have much of anyting on the tranny's other than removal and replacment of the tranny, nothing electrical about it.

I think Randy has the factory service manual, which should have it in it, how about it Randy, could you post the TCU diagram? I could use it myself right now, to decipher which wires to jump on the nuetral safty switch to make my 5-Speed conversion start without the Nuetral Saftey Switch laying under the hood.

Thanks,

Huck, I'll see what I can do. Sorry I haven't responded yet to your previous PM.