The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Technical Q & A

Reply
 
Thread Tools Display Modes
  #1  
Old 01-04-2010, 05:27 PM
**Ewie**'s Avatar
**Ewie** **Ewie** is offline
Aussie in enemy territory
 
Join Date: Nov 2009
Location: Auckland, New Zealand
Posts: 303
Registered SVX
Rear Combo Light - Fixing Leaks

Well in an attempt to fix the leaky brake light syndrome and after researching here for some time, I bought a new set of gaskets and today removed one of the offending lights. To my surprise, there's absolutely no evidence that moisture has been getting past the existing gaskets and on closer examination, I believe it's getting in through the holes where the red acrylic lens "snaps" into the main black housing. I'm assuming therefore that the problems is actually failure of the seal/glue between the lens and the body itself.

My question is, has anyone ever removed the lens from the main housing before? I'd like to know it's posisble before I go and destroy an otherwise good light unit.
Reply With Quote
  #2  
Old 01-04-2010, 06:41 PM
MadMaxSvx's Avatar
MadMaxSvx MadMaxSvx is offline
Registered User
 
Join Date: Jun 2009
Location: Paraguay
Posts: 455
Registered SVX
Re: Rear Combo Light - Fixing Leaks

http://www.subaru-svx.net/forum/show...ht=oven&page=6

READ THE POST #14

(AT YOUR OWN RISK)

__________________
95´ Subaru SVX EURO
85' Mercedes 190 2.3-16
86' Mercedes 190E
70' Olds Toronado
98' Renault Chamade
82' Honda Prelude
79' Honda Accord awaiting restomod.
69' Mustang Hardtop
67' Jeep Ford Willys awaiting restoration.
67' IKA Torino Coupe
74' Renault Torino Coupe
Reply With Quote
  #3  
Old 01-04-2010, 07:06 PM
**Ewie**'s Avatar
**Ewie** **Ewie** is offline
Aussie in enemy territory
 
Join Date: Nov 2009
Location: Auckland, New Zealand
Posts: 303
Registered SVX
Re: Rear Combo Light - Fixing Leaks

Thanks for that, also saw the lobster pot boiling idea as well. I think I'll see if I can get a couple of spare lights before I attempt this though....
Reply With Quote
  #4  
Old 01-04-2010, 07:18 PM
MadMaxSvx's Avatar
MadMaxSvx MadMaxSvx is offline
Registered User
 
Join Date: Jun 2009
Location: Paraguay
Posts: 455
Registered SVX
Re: Rear Combo Light - Fixing Leaks

Well, i will try the oven procedure in my tail lights, they have moisture and dirt on them and its time of doing something, i hope the result is good.
__________________
95´ Subaru SVX EURO
85' Mercedes 190 2.3-16
86' Mercedes 190E
70' Olds Toronado
98' Renault Chamade
82' Honda Prelude
79' Honda Accord awaiting restomod.
69' Mustang Hardtop
67' Jeep Ford Willys awaiting restoration.
67' IKA Torino Coupe
74' Renault Torino Coupe
Reply With Quote
  #5  
Old 01-05-2010, 01:33 AM
ensteele's Avatar
ensteele ensteele is offline
Betcha can't buy just one!
Alcyone Gold Contributor
 
Join Date: Jan 2002
Location: Burlington, WA
Posts: 19,552
Send a message via ICQ to ensteele Send a message via Yahoo to ensteele Send a message via Skype™ to ensteele
Registered SVX Classic SVX
Re: Rear Combo Light - Fixing Leaks

I have never seen any reason that the gaskets didn't keep the water out, but after replacing them, it stopped the problem. Don't tighten the fasteners too tight when you put them back on. That can cause the problem as well.
__________________
.
Earl .... ... .... ><SVX(*>

Subaru Ambassador

[COLOR=”silver”]1992 Tri Color L[/COLOR] ~45K (06/91) #2430
1992 Dark Teal LS-L ~184K (05/91) #0739
1992 Claret LS-L ~196K (05/91) #0831
1992 Pearl LS-L ~103K (06/91) #1680
1992 Pearl LS-L ~151K (06/91) #2229
1992 Dark Teal LS ~150K (07/91) #3098 (parts car)
1992 White LS-L ~139K (08/92) #6913
1993 25th AE ~98K (02/93) #164
1993 25th AE ~58K (02/93) #176
1993 25th AE ~107K (02/93) #215
1993 25th AE ~162K (02/93) #223
1994 Laguna Blue Pearl LSi ~124K (1/94) #2408
1994 Laguna Blue Pearl LSi ~144K (10/93) #1484
1994 Laguna Blue Pearl LSi ~68K (10/93) #1525
1994 Barcelona Red LSi ~46K (02/94) #2624
1994 Pearl LSi ~41K (12/93) #1961
1995 Bordeaux Pearl LSi ~70K (02/95) #855
1996 Polo Green LSi ~95K (03/96) #872
1997 Bordeaux Pearl LSi ~55K (08/96) #097
2003 Brilliant Red LS1 Convertible ~29K (04/03) #8951
1999 Magnetic Red LS1 Coupe ~33K (04/99) #6420

My Email | Old Locker | New Locker | Picture of 15 of the 19
Reply With Quote
  #6  
Old 01-05-2010, 02:26 AM
**Ewie**'s Avatar
**Ewie** **Ewie** is offline
Aussie in enemy territory
 
Join Date: Nov 2009
Location: Auckland, New Zealand
Posts: 303
Registered SVX
Re: Rear Combo Light - Fixing Leaks

Thanks Earl.. I have brand new gaskets ready to go in.. rightnow I've got both light units stored in our hot water cupboard, the warmest/driest place in our home, so that they will dry out completely. Hopefully they'll dry out overnight and I'll fit them tomorrow. Would it help to use any sort of water repellent sealant or grease on the gaskets as well??
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 02:19 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122