SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Possible solution for problematic sunvisors
I have a pair of sunvisors from my 97 Outback parts car. They are very close to mounting in the SVX, IF YOU REVERSE THEM. As in put the passenger side visor on the driver's side and vice versa. The screws holes on the SVX are just slightly farther apart then the Outback visors.
A little dremel fabrication should take care of that. As for the retainer clip, it is slightly out of place. That shouldn't be too hard to take care of, one way or another. Maybe just skinny it up a little or move it over. It wouldn't show too much with the visor in place. I don't know how much it would bother SVX owners that neither of my Outback visors had a wire for light. Maybe a Limited would. Hope this gives some hope to some. My SVX visors are fine, so I guess I'm one of the lucky ones.
__________________
92 Ebony - Level 10/n2o REAR-ENDED 92 Teal - painted yellow/4.11 5spd/n2o SOLD 92 Claret - 4.44 SOLD 94 Barcelona - FWD SOLD 92 Ebony - 3.90 SOLD 94 Laguna ROLLING w/4.44s/Ecutune ECU +TCU/STI springs/Infiniti M45 rims |
|
|