Best place to buy front sway bar links

[msvx95]

I'm in need of new sway bar links and have seen some on Ebay, but where is the best recommended place to buy non-adjustable ones currently?

Thanks,

[lsupcar]

I got my stock items from 1st subaru parts. They had them in stock.
Bill

[LastSVXintheChi]

has anyone tried NAPA because supposedly they have them for our cars???
cus im looking too

[92snowmachine]

napa in denver has em in their ultra-8 brand #ATM 1031367

[LastSVXintheChi]

Originally Posted by 92snowmachine

napa in denver has em in their ultra-8 brand #ATM 1031367

Did they fit lol

[92snowmachine]

fit perfect, if they were dirty would be hard to tell them from the stock ones.

[LastSVXintheChi]

Originally Posted by 92snowmachine

fit perfect, if they were dirty would be hard to tell them from the stock ones.

Sweet! Because they have them here and they are a third of the price...$15.00 and then 7.50 for shipping or 28.99 at the store! So mysvx95 that's where I'm going

[msvx95]

Originally Posted by 92snowmachine

napa in denver has em in their ultra-8 brand #ATM 1031367

I just ordered these today actually, 1 set from Napa. Total for me was about 36.00 a piece.

[LastSVXintheChi]

Originally Posted by msvx95

I just ordered these today actually, 1 set from Napa. Total for me was about 36.00 a piece.

thats odd i just checked again and they went up here they were 15 each now they are 36 each also

[msvx95]

Hopefully my purchase didn't cause the system to up the charge, doh!

[msvx95]

So this part number from NAPA ATM 1031367, 1 set came with Hex Locknuts, the other none...I need two more locknuts but trying to confirm the size.
I'm measuring 16.8mm flats and 10mm thick. Is this a M10x1.5mm Pitch, 17mm wide locknut? I'm unsure of the thread size, but a 17mm socket fits on this.

[92snowmachine]

you could probably just take the one without nuts back and exchange it. someone probably bought it, took the nuts, and returned it. the same link fits some mazdas from 93-02 so they should have another one.

[LastSVXintheChi]

Originally Posted by msvx95

So this part number from NAPA ATM 1031367, 1 set came with Hex Locknuts, the other none...I need two more locknuts but trying to confirm the size.
I'm measuring 16.8mm flats and 10mm thick. Is this a M10x1.5mm Pitch, 17mm wide locknut? I'm unsure of the thread size, but a 17mm socket fits on this.

maybe it did lol but i dont know if i need them anymore cus im pretty sure its the "lever" that is bad not the links

[msvx95]

Went to Fastenal to correctly size it...turns out to be an M10 x 1.25 which they don't carry. Par for the coarse I guess. Found another place that carries them though.