SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
code 23
I have a '92 svx engine in a '86 vanagon. The conversion is almost done and I am trying to work out the bugs. I have the check engine light hooked up and I keep getting code 23. The idle is high, at about 1800 to 2000. The CE light flashes on and then off at about 2500 to 3000 rpms if I rev it up really fast. If i gradually increase the rpms I get no code. I have tried a different MAF and have search all over for a vacuum leak. Any help or insight would help, thanks
|
#2
|
||||
|
||||
Check the input signal from the MAF to the ECU.
Send me a PM with your e-mail address and I can send you a trouble shooting file from SOA. Steve
__________________
92 SVX AWD 130,000 w/ rebuilt SVX 4.11 97 Audi A4 1.8T (Daily Driver) 03 Ford Expedition(hers) SVXepidia SVX information warehouse Are you in? My Old Locker A 4.11 Founding Father "Tranny #6" I really need a manual Reading IX [SIGPIC][/SIGPIC] Ya I was there
|
|
|