SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Pictures with questions/comments of Intake Manifold Removed
I've just finished removing the intake manifold and there are some parts I need to order. I will post a few different pictures with questions.
I've noticed a lot of caked oil as you will see in the pictures. First set of pics: Manifold off, is my IRIS valve bad? Should I replace the whole part or does it have an o-ring? |
#2
|
||||
|
||||
Re: Pictures with questions/comments of Intake Manifold Removed
Second set of pics:
I just replaced my IACV not too long ago, but it is still giving me a code 24. I see a seperation in the insulation on the wire for the plug. I don't know how difficult it is to splice and replace this plug? Any thoughts? Should I replace the whole wire harness as shown in the picture? What is the harness part number? |
#3
|
||||
|
||||
Re: Pictures with questions/comments of Intake Manifold Removed
Third set of pictures:
The EGR hoses, which one goes with the egr valve as pictured just above my thumb? There are two inlets and not sure which one goes where |
#4
|
||||
|
||||
Re: Pictures with questions/comments of Intake Manifold Removed
Last set of pictures:
These show the parts I was going to replace anyways. The hose broke on my AACV, so I have a new hose and new AACV that will be installed. The knock sensor shows a crack in the housing. I will replace both sensors. Tons of oil....wow. |
|
|