SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
mount info
ok i ordered all my stuff the gc coilovers for 399 and the konis for 630 from ground control. i also order the sway bushings from summit. i want to know a way to check (test) the strut mounts f&r. i feel good about not replacing cause i got a 97 but then i dont cause my car has been driven in hard states (rough terrain). do we have to go with the stock mounts? will the sti mounts fit? are they really that big of a deal? how much and where to buy? i really dont want to buy any more stuff cause i got money for painting to do.
|
#2
|
|||
|
|||
well i did the only test i can think of with out taking every thing apart. removing the dust caps and bouncing the car. they looked sturdy from the top rubber seemed good not much play. i prey they are good cause i dont want the car out of commission to wait on a order to ak. the rears i cant even get to. but still hit me with some consumer info. ty. and the camber sets that go on the mounts replace them or just go over them. (i saw on gcs site)
|
#3
|
||||
|
||||
I don't know of any other mounts that will bolt in to the SVX.
To get to the rears you have to take off (in order): - rear seat bottom (easy) - rear side interior panels (4 clips & 2 power connectors) - rear shelf (2 screws and multiple clips)
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
#4
|
|||
|
|||
as in rear shelf u mean the ones with the kicken 6X9s? and just fold the seats down after bottom of seat is gone?
|
#5
|
||||
|
||||
yes and yes
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
|
|